IPv6 Hardware Compatibility List » History » Revision 11
Revision 10 (Nico Schottelius, 05/02/2019 12:41 AM) → Revision 11/18 (Nico Schottelius, 05/02/2019 12:48 AM)
h1. IPv6 Hardware Compatibility List
{{toc}}
h2. Note
For editing, create an account on https://account.ungleich.ch
h2. The list
* Statuses
** none: No IPv6 support whatever
** limited: somewhat works, mostly unusable
** partial: mostly works
** almost: has most features, can be used productively, advanced features missing
** full: works fully in IPv6 only networks
|_. What? |_. Status |
| All Mikrotik RouterOS devices | partial (see [[#Mikrotik-RouterOS]]) |
| All Mikrotik SwitchOS devices | limited (see [[#Mikrotik-SwitchOS]]) |
| Arista 7050 / EOS 4.18 | almost (see [[#Arista EOS]]) |
| Ubiquiti HD AP AC Pro | partial (see [[#Ubiquiti]]) |
h2. Mikrotik RouterOS
As of/until RouterOS 6.44.3, devices can assign themselves IPv6, can route IPv6, but devices cannot be updated in IPv6 only networks (not even with DNS64/NAT64 in place).
What works:
* DNS resolution via IPv6
Quirks:
* DNS is in the "IP" menu, IPv6 DNS works there, too
What does not work/is missing:
* Upgrade via IPv6 only
* NAT64
* DNS64
* CAPSMAN: cannot find the capsman via ipv6 address
h2. Mikrotik SwitchOS
* Management IP cannot be IPv6
* No IPv6 updates
Highly disrecommended, as they cannot be managed in IPv6 only networks, not even after manual configuration.
h2. Arista EOS
As of EOS 4.18.6 EOS mostly works with IPv6. In Arista 7050 with 4.18.6 there is are no NAT64 capabilties.
h2. Ubiquiti
The HD AP AC Pro was tested on 2019-05-01 and the result was as follows:
* The mobile phone app only works with IPv4 (discovery, basic config)
* The AP accepts IPv6 from the network via router advertisements
* The AP does not have rdnssd installed, so there are no DNS servers on the AP itself
* It seems the AP stops broadcasting its SSID after some time without IPv4