Actions
IPv6 Hardware Compatibility List » History » Revision 8
« Previous |
Revision 8/18
(diff)
| Next »
Nico Schottelius, 05/01/2019 11:46 PM
IPv6 Hardware Compatibility List¶
- Table of contents
- IPv6 Hardware Compatibility List
The list¶
- Statuses
- none: No IPv6 support whatever
- limited: somewhat works, mostly unusable
- partial: mostly works
- almost: has most features, can be used productively, advanced features missing
- full: works fully in IPv6 only networks
What? | Status |
---|---|
All Mikrotik RouterOS devices | partial (see #Mikrotik-RouterOS) |
All Mikrotik SwitchOS devices | limited (see #Mikrotik-SwitchOS) |
Arista 7050 / EOS 4.18 | almost (see #Arista EOS) |
Ubiquiti HD AP AC Pro | partial (see #Ubiquiti) |
Mikrotik RouterOS¶
As of/until RouterOS 6.44.3, devices can assign themselves IPv6, can route IPv6, but devices cannot be updated in IPv6 only networks (not even with DNS64/NAT64 in place).
What works:
- DNS resolution via IPv6
Quirks:
- DNS is in the "IP" menu, IPv6 DNS works there, too
What is missing:
- Upgrade via IPv6 only
- NAT64
- DNS64
Mikrotik SwitchOS¶
- Management IP cannot be IPv6
- No IPv6 updates
Highly disrecommended, as they cannot be managed in IPv6 only networks, not even after manual configuration.
Arista EOS¶
As of EOS 4.18.6 EOS mostly works with IPv6. In Arista 7050 with 4.18.6 there is are no NAT64 capabilties.
Ubiquiti¶
The HD AP AC Pro was tested on 2019-05-01 and the result was as follows:
- The mobile phone app only works with IPv4 (discovery, basic config)
- The AP accepts IPv6 from the network via router advertisements
- The AP does not have rdnssd installed, so there are no DNS servers on the AP itself
Updated by Nico Schottelius over 5 years ago · 8 revisions