IPv6 Hardware Compatibility List » History » Version 6
Nico Schottelius, 05/01/2019 11:39 PM
1 | 1 | Nico Schottelius | h1. IPv6 Hardware Compatibility List |
---|---|---|---|
2 | |||
3 | 2 | Nico Schottelius | {{toc}} |
4 | |||
5 | 1 | Nico Schottelius | h2. The list |
6 | |||
7 | 3 | Nico Schottelius | * Statuses |
8 | ** none: No IPv6 support whatever |
||
9 | ** limited: somewhat works, mostly unusable |
||
10 | ** partial: mostly works |
||
11 | ** almost: has most features, can be used productively, advanced features missing |
||
12 | ** full: works fully in IPv6 only networks |
||
13 | |||
14 | |||
15 | 1 | Nico Schottelius | |_. What? |_. Status | |
16 | 3 | Nico Schottelius | | All Mikrotik RouterOS devices | partial (see [[#Mikrotik-RouterOS]]) | |
17 | | All Mikrotik SwitchOS devices | limited (see [[#Mikrotik-SwitchOS]]) | |
||
18 | 4 | Nico Schottelius | | Arista 7050 / EOS 4.18 | almost (see [[#Arista EOS]]) | |
19 | 5 | Nico Schottelius | | Ubiquiti HD AP AC Pro | partial | (see [[#Ubiquiti]]) | |
20 | 1 | Nico Schottelius | |
21 | h2. Mikrotik RouterOS |
||
22 | 3 | Nico Schottelius | |
23 | 6 | Nico Schottelius | As of/until RouterOS 6.44.3, devices can assign themselves IPv6, can route IPv6, but devices cannot be updated in IPv6 only networks (not even with DNS64/NAT64 in place). |
24 | |||
25 | What works: |
||
26 | |||
27 | * DNS resolution via IPv6 |
||
28 | |||
29 | What is missing: |
||
30 | |||
31 | * Upgrade via IPv6 only |
||
32 | * NAT64 |
||
33 | * DNS64 |
||
34 | 3 | Nico Schottelius | |
35 | |||
36 | h2. Mikrotik SwitchOS |
||
37 | |||
38 | * Management IP cannot be IPv6 |
||
39 | * No IPv6 updates |
||
40 | |||
41 | h2. Arista EOS |
||
42 | |||
43 | 4 | Nico Schottelius | As of EOS 4.18.6 EOS mostly works with IPv6. In Arista 7050 with 4.18.6 there is are no NAT64 capabilties. |
44 | 5 | Nico Schottelius | |
45 | h2. Ubiquiti |
||
46 | |||
47 | The HD AP AC Pro was tested on 2019-05-01 and the result was as follows: |
||
48 | |||
49 | * The mobile phone app only works with IPv4 (discovery, basic config) |
||
50 | * The AP accepts IPv6 from the network via router advertisements |
||
51 | * The AP does not have rdnssd installed, so there are no DNS servers on the AP itself |