VIIRB - The VPN IPv6 IoT Router Box - Manual » History » Revision 5
Revision 4 (Nico Schottelius, 06/13/2020 07:51 PM) → Revision 5/6 (Nico Schottelius, 06/13/2020 10:09 PM)
h1. VIIRB - The VPN IPv6 IoT Router Box - Manual
{{toc}}
Status: This document is *pre-production*.
h2. IPv6 / IPv6VPN
* Addresses for the VIIRB are taken from the network 2a0a:e5c1:300::/40
* Each VIIRB gets a /48 assigned
h2. DNS / DNS64 support
The nameservers 2a0a:e5c0:a::a and 2a0a:e5c0:2:a::a return DNS64 replies. They are setup as the default forwarding DNS servers.
h2. Wireless
* The shipped configuration contains the SSID *IPv6 everywhere*
* It is secured with WPA2-PSK
* The wifi password is *iloveipv6*
h2. Configuration on ungleich infrastructure
h3. VIIRB itself
* Connect the new VIIRB to a network with IPv4 (that's the test case) and Internet
* Connect your computer to the same network
* Use ./setup-viirb.sh from https://code.ungleich.ch/ungleich-public/ungleich-tools
Example for configuring viirb02:
<pre>
./setup-viirb.sh wlan0 2 ~/vcs/ungleich-dot-cdist "Nico Schottelius, nico.schottelius at ungleich.ch, Ticket 2342"
</pre>
h3. VPN server
* vpn-2a0ae5c1300.ungleich.ch
Is automatically reconfigured by setup-viirb.sh using cdist.