Actions
Task #8094
closedTest ubiquiti UAP-AC-Lite, UAP-AC-LR and UAP-AC-Pro-Gen2 in IPv6 only networks
Start date:
05/31/2020
Due date:
% Done:
0%
Estimated time:
PM Check date:
Description
Steps¶
- Upgraded firmware to version 4.3.13
- Configured them via unifi network
- Connect them to an IPv6 only network
Result¶
- Access point turn off the radio shortly after booting
- Tested via "wpa_cli -i wlan0 scan" on computers nearby
- This does not happen if the AP gets an IPv4 address via dhcp
Source of problem¶
It seems that the uplink-monitor fails to detect the IPv6 uplink and according to https://community.ui.com/questions/UniFi-Controller-Connectivity-Monitor/630191eb-b6a1-4354-898b-610211197414 if there is no uplink, the radios are disabled.
Further issues¶
- It seems /etc/resolv.conf is empty
- this might be, because rdnssd is not running
Updated by Nico Schottelius over 4 years ago
- Project changed from Open Infrastructure to ipv6
Updated by Nico Schottelius over 4 years ago
Debugging further:
ubnt-lr-1-BZ.v4.3.13# ps w | grep hostap 1380 ubnt 6164 S /usr/sbin/hostapd -d -s /etc/aaa1.cfg 1381 ubnt 6164 S /usr/sbin/hostapd -d -s /etc/aaa3.cfg 4392 ubnt 1228 S grep hostap ubnt-lr-1-BZ.v4.3.13# cat /etc/aaa1.cfg interface=ath0 ctrl_interface=/var/run/hostapd bridge=br0 driver=atheros nas_identifier=$bssid wpa=3 eapol_version=2 ssid=dg ipv6 wpa_group_rekey=0 wpa_group_update_count=4 wpa_gmk_rekey=86400 wpa_passphrase=ungleich wpa_pairwise=TKIP CCMP wpa_key_mgmt=WPA-PSK logger_syslog=-1 logger_syslog_level=1 wlan_id=c12b own_ip_addr=192.168.1.20 ubnt-lr-1-BZ.v4.3.13#
It has a record of an own ip, which it actually set it up.
In the log this message might be the reason why the radio is turned off:
Thu Apr 30 15:42:53 2020 user.err : uplink-monitor[1446]: uplink-monitor.get_link_info(): uplink addr i s null
Updated by Nico Schottelius 12 months ago
- Status changed from In Progress to Rejected
Actions