IPv6 Hardware Compatibility List » History » Version 8
Nico Schottelius, 05/01/2019 11:46 PM
1 | 1 | Nico Schottelius | h1. IPv6 Hardware Compatibility List |
---|---|---|---|
2 | |||
3 | 2 | Nico Schottelius | {{toc}} |
4 | |||
5 | 1 | Nico Schottelius | h2. The list |
6 | |||
7 | 3 | Nico Schottelius | * Statuses |
8 | ** none: No IPv6 support whatever |
||
9 | ** limited: somewhat works, mostly unusable |
||
10 | ** partial: mostly works |
||
11 | ** almost: has most features, can be used productively, advanced features missing |
||
12 | ** full: works fully in IPv6 only networks |
||
13 | |||
14 | |||
15 | 1 | Nico Schottelius | |_. What? |_. Status | |
16 | 3 | Nico Schottelius | | All Mikrotik RouterOS devices | partial (see [[#Mikrotik-RouterOS]]) | |
17 | | All Mikrotik SwitchOS devices | limited (see [[#Mikrotik-SwitchOS]]) | |
||
18 | 4 | Nico Schottelius | | Arista 7050 / EOS 4.18 | almost (see [[#Arista EOS]]) | |
19 | 7 | Nico Schottelius | | Ubiquiti HD AP AC Pro | partial (see [[#Ubiquiti]]) | |
20 | 1 | Nico Schottelius | |
21 | h2. Mikrotik RouterOS |
||
22 | 3 | Nico Schottelius | |
23 | 6 | Nico Schottelius | As of/until RouterOS 6.44.3, devices can assign themselves IPv6, can route IPv6, but devices cannot be updated in IPv6 only networks (not even with DNS64/NAT64 in place). |
24 | |||
25 | What works: |
||
26 | |||
27 | * DNS resolution via IPv6 |
||
28 | |||
29 | 8 | Nico Schottelius | Quirks: |
30 | |||
31 | * DNS is in the "IP" menu, IPv6 DNS works there, too |
||
32 | |||
33 | 6 | Nico Schottelius | What is missing: |
34 | |||
35 | * Upgrade via IPv6 only |
||
36 | * NAT64 |
||
37 | 3 | Nico Schottelius | * DNS64 |
38 | |||
39 | h2. Mikrotik SwitchOS |
||
40 | |||
41 | * Management IP cannot be IPv6 |
||
42 | 1 | Nico Schottelius | * No IPv6 updates |
43 | 7 | Nico Schottelius | |
44 | Highly disrecommended, as they cannot be managed in IPv6 only networks, not even after manual configuration. |
||
45 | 3 | Nico Schottelius | |
46 | h2. Arista EOS |
||
47 | |||
48 | 4 | Nico Schottelius | As of EOS 4.18.6 EOS mostly works with IPv6. In Arista 7050 with 4.18.6 there is are no NAT64 capabilties. |
49 | 5 | Nico Schottelius | |
50 | h2. Ubiquiti |
||
51 | |||
52 | The HD AP AC Pro was tested on 2019-05-01 and the result was as follows: |
||
53 | |||
54 | * The mobile phone app only works with IPv4 (discovery, basic config) |
||
55 | * The AP accepts IPv6 from the network via router advertisements |
||
56 | * The AP does not have rdnssd installed, so there are no DNS servers on the AP itself |