The ungleich VPN infrastructure » History » Revision 13
Revision 12 (Nico Schottelius, 01/25/2019 06:02 PM) → Revision 13/31 (Nico Schottelius, 01/25/2019 11:03 PM)
h1. The ungleich VPN infrastructure
{{toc}}
h2. Status
This document is *IN PRODUCTION*.
h2. Security of IPv6 vs. NAT
A quick reminder: whether you are using private RFC1918 IPv4 addresses or IPv6 addresses, if you don't want people to access your network, you need to configure a firewall.
h2. Wireguard on vpn-2a0ae5c1.ungleich.ch
* Server: vpn-2a0ae5c1.ungleich.ch
* Port: 51820
* Requires a public key
* Client network: 2a0a:e5c1:100::/40
* Client network size: /48
h3. How to add a new customer connection
* Get the public key of the customer
* Edit dot-cdist/type/__ungleich_wireguard/manifest and add the new network definition at the end of the file
* Let the customer know their network
h3. Sample clustomer client configuration
* "Install wireguard":https://www.wireguard.com/install/
* Create your private key: @umask 077; wg genkey > privkey@
* Get your public key: @wg pubkey < privkey@
** You need to send this pubkey to ungleich
* You will get your network definition after we have received your public key
* Create /etc/wireguard/wg0.conf
<pre>
[Interface]
PrivateKey = YOURKEYHERE
Address = YOURIPv6IPADDRESSHERE/48
ListenPort = 51280
[Peer]
PublicKey = hi60lGP+xEUQ+kVnqA7PlJAO1SVqTS1W36g0LhFP0xQ=
Endpoint = vpn-2a0ae5c1.ungleich.ch:51820
AllowedIPs = ::/0
</pre>
Commands for setting it up
<pre>
MY_NET=2a0a:e5c1:XXXX::1/48
ip link add dev wg0 type wireguard
# Replace with your range
ip addr add $MY_NET dev wg0
# Add routing
ip route add 2a0a:e5c1:100::/40 dev wg0
ip route add ::/0 via 2a0a:e5c1:100::1
# Configure the interface
wg setconf wg0 /etc/wireguard/wg0.conf
# Bring it up
ip link set wg0 up
</pre>
Once it runs, you can also use @wg-quick@ to get it up faster:
<pre>
wg-quick up wg0
</pre>
(this just requires a configuration file named /etc/wireguard/wg0.conf to be existing)
Debugging
* wg show
* ping 2a0a:e5c1:100::1
h3. Sample server configuration
This is just for reference - as a client you don't need this configuration
/etc/wireguard/wg0.conf:
<pre>
[Interface]
ListenPort = 51820
PrivateKey = SERVERKEYHERE
# Nico, 2019-01-23
[Peer]
PublicKey = kL1S/Ipq6NkFf1MAsNRou4b9VoUsnnb4ZxgiBrH0zA8=
AllowedIPs = 2a0a:e5c1:101::/48
# Customer networks below
# ...
</pre>
Sample server rc.local:
<pre>
ip link add dev wg0 type wireguard
ip addr add 2a0a:e5c1:100::1/40 dev wg0
wg setconf wg0 /etc/wireguard/wg0.conf
ip link set wg0 up
</pre>
h2. OpenVPN on openvpn.ungleich.ch
* Server: openvpn.ungleich.ch
* Port: 1195
* Requires a certificate
* Address range: 2a0a:e5c0:3::/48
** Client networks are /64