Open Infrastructure

Wiki »

The ungleich hardware maintenance guide » History » Revision 15

Revision 14 (Nico Schottelius, 02/12/2022 11:29 AM) → Revision 15/23 (Nico Schottelius, 02/12/2022 11:29 AM)

{{toc}} 

 h1. The ungleich hardware maintenance guide 

 This guide describes common operations on hardware we use. 

 h2. Using the ungleich-hardware container in kubernetes and docker 

 To manage hardware on server1 in kubernetes, you can use: 

 <pre> 
 apiVersion: v1 
 kind: Pod 
 metadata: 
   name: ungleich-hardware 
 spec: 
   containers: 
   - name: ungleich-hardware 
     image: harbor.ungleich.svc.p10.k8s.ooo/ungleich-public/ungleich-hardware:0.0.3 
     args: 
     - sleep 
     - "1000000" 
     volumeMounts: 
       - mountPath: /dev 
         name: dev 
     securityContext: 
       privileged: true 
   nodeSelector: 
     kubernetes.io/hostname: "server1" 

   volumes: 
     - name: dev 
       hostPath: 
         path: /dev 

 </pre> 

 To use it wit docker: 

 <pre> 
 docker run -v /dev:/dev --privileged -ti harbor.ungleich.svc.p10.k8s.ooo/ungleich-public/ungleich-hardware:0.0.3 
 </pre> 

 h2. APU Bios Update 

 * Download the correct bios from https://pcengines.github.io/ 
 ** Check whether it's apu1/2/3/4 before downloading 
 * Install flashrom 
 * "Flash bios using flashrom":https://github.com/pcengines/apu2-documentation/blob/master/docs/firmware_flashing.md 
 ** @flashrom -w THEROMFILE -p internal@ 

 h2. APU Serial and bootloader configuration 

 * Ensure that the bootloader has "console=ttyS0,115200" configured 
 * Ensure that there is a getty running on serial 
 * Use grub-bios as the bootloader 
 ** Install using @grub-install /dev/sda@ 

 h2. Updating the Perc H800 SAS controller 

 * @wget 'https://dl.dell.com/FOLDER03292738M/3/SAS-RAID_Firmware_XKF5X_LN_12.10.7-0001_A13.BIN?uid=4b8a2506-f4d4-46a9-ab19-3c2a5008a782&fn=SAS-RAID_Firmware_XKF5X_LN_12.10.7-0001_A13.BIN' -O    SAS-RAID_Firmware_XKF5X_LN_12.10.7-0001_A13.BIN@ 
 * chmod u+x SAS-RAID_Firmware_XKF5X_LN_12.10.7-0001_A13.BIN 
 * ./SAS-RAID_Firmware_XKF5X_LN_12.10.7-0001_A13.BIN 

 

 h2. HP servers disk management 

 * See also http://www.datadisk.co.uk/html_docs/redhat/hpacucli.htm 

 Show all drives/controller overview: 

 <pre> 
 hpacucli ctrl all show config 

 hpacucli ctrl slot=0 pd all show 
 </pre> 

 Add a disk as raid0: 

 <pre> 
 hpacucli ctrl slot=0 create type=ld drives=1I:1:1 raid=0 
 </pre> 

 

 h2. Dell servers disk management 

 Listing all disks: 

 <pre> 
 megacli -PDList -aALL 
 </pre> 

 Adding disks: 

 <pre> 
 megacli -CfgLdAdd -r0 [Enclosure Device ID:slot] -aX (X : host is 0. md-array is 1) 

 # Sample call, if enclosure and slot are KNOWN (aka not N/A) 
 megacli -CfgLdAdd -r0 [32:0] -a0 

 # Sample call, if enclosure is N/A 
 megacli -CfgLdAdd -r0 [:0] -a0 
 </pre> 

 Remove cache of disks that are not in the server anymore: 

 <pre> 
 megacli -DiscardPreservedCache -Lall -aAll 
 </pre> 

 Remove foreign configurations on foreign disks 

 <pre> 
 megacli -CfgForeign -Clear -aAll 
 </pre> 

 Do both in many cases: 

 <pre> 
 megacli -DiscardPreservedCache -Lall -aAll 
 megacli -CfgForeign -Clear -aAll 
 </pre> 

 h2. SEE ALSO 

 * [[Managing OpenWRT]] 
 * [[The_ungleich_ceph_handbook]]