The ungleich kubernetes infrastructure and ungleich kubernetes manual¶

• Table of contents
• The ungleich kubernetes infrastructure and ungleich kubernetes manual
  • Status
  • k8s clusters
  • General architecture and components overview
    • Cluster types
  • General k8s operations
    • Cheat sheet / external great references
    • Get the argocd credentials
    • Get the cluster admin.conf
    • Installing a new k8s cluster
    • Deleting a pod that is hanging in terminating state
    • Listing nodes of a cluster
    • Removing / draining a node
    • Readding a node after draining
  • Rook / Ceph Related Operations
    • Inspecting the logs of a specific server
    • Triggering server prepare / adding new osds
    • Removing an OSD
  • Infrastructure versions
    • ungleich kubernetes infrastructure v3
    • ungleich kubernetes infrastructure v2
    • ungleich kubernetes infrastructure v1

Status¶

This document is pre-production.
This document is to become the ungleich kubernetes infrastructure overview as well as the ungleich kubernetes manual.

k8s clusters¶

Cluster	Purpose/Setup	Maintainer	Master(s)	argo	rook	last verified
c0.k8s.ooo	Dev	-	UNUSED			2021-10-05
c1.k8s.ooo	Dev p6 VM	Nico	2a0a-e5c0-2-11-0-62ff-fe0b-1a3d.k8s-1.place6.ungleich.ch			2021-10-05
c2.k8s.ooo	Dev p7 HW	Nico	server47 server53 server54	x	x	2021-10-05
c3.k8s.ooo	Test p7 PI	-	UNUSED			2021-10-05
c4.k8s.ooo	Dev2 p7 HW	Fran/Jin-Guk	server52 server53 server54			-
c5.k8s.ooo	Dev p6 VM Amal	Nico/Amal	2a0a-e5c0-2-11-0-62ff-fe0b-1a46.k8s-1.place6.ungleich.ch
c6.k8s.ooo	Dev p6 VM Jin-Guk	Jin-Guk
p6.k8s.ooo	production		server67 server69 server71	x	x	2021-10-05
p10.k8s.ooo	production		server63 server65 server83	x	x	2021-10-05

General architecture and components overview¶

• All k8s clusters are IPv6 only
• We use BGP peering to propagate podcidr and serviceCidr networks to our infrastructure
• The main public testing repository is ungleich-k8s
  • Private configurations are found in the k8s-config repository

Cluster types¶

Type/Feature	Development	Production
Min No. nodes	3 (1 master, 3 worker)	5 (3 master, 3 worker)
Recommended minimum	4 (dedicated master, 3 worker)	8 (3 master, 5 worker)
Separation of control plane	optional	recommended
Persistent storage	required	required
Number of storage monitors	3	5

General k8s operations¶

Cheat sheet / external great references¶

• kubectl cheatsheet

Get the argocd credentials¶

kubectl -n argocd get secret argocd-initial-admin-secret -o jsonpath="{.data.password}" | base64 -d; echo "" 

Get the cluster admin.conf¶

• On the masters of each cluster you can find the file /etc/kubernetes/admin.conf
• To be able to administrate the cluster you can copy the admin.conf to your local machine
• Multi cluster debugging can very easy if you name the config ~/cX-admin.conf (see example below)

% scp root@server47.place7.ungleich.ch:/etc/kubernetes/admin.conf ~/c2-admin.conf
% export KUBECONFIG=~/c2-admin.conf    
% kubectl get nodes
NAME       STATUS                     ROLES                  AGE   VERSION
server47   Ready                      control-plane,master   82d   v1.22.0
server48   Ready                      control-plane,master   82d   v1.22.0
server49   Ready                      <none>                 82d   v1.22.0
server50   Ready                      <none>                 82d   v1.22.0
server59   Ready                      control-plane,master   82d   v1.22.0
server60   Ready,SchedulingDisabled   <none>                 82d   v1.22.0
server61   Ready                      <none>                 82d   v1.22.0
server62   Ready                      <none>                 82d   v1.22.0               

Installing a new k8s cluster¶

• Decide on the cluster name (usually cX.k8s.ooo), X counting upwards
  • Using pXX.k8s.ooo for production clusters of placeXX
• Use cdist to configure the nodes with requirements like crio
• Decide between single or multi node control plane setups (see below)
  • Single control plane suitable for development clusters

Typical init procedure:

• Single control plane: kubeadm init --config bootstrap/XXX/kubeadm.yaml
• Multi control plane (HA): kubeadm init --config bootstrap/XXX/kubeadm.yaml --upload-certs

Deleting a pod that is hanging in terminating state¶

kubectl delete pod <PODNAME> --grace-period=0 --force --namespace <NAMESPACE>

(from https://stackoverflow.com/questions/35453792/pods-stuck-in-terminating-status)

Listing nodes of a cluster¶

[15:05] bridge:~% kubectl get nodes
NAME       STATUS   ROLES                  AGE   VERSION
server22   Ready    <none>                 52d   v1.22.0
server23   Ready    <none>                 52d   v1.22.2
server24   Ready    <none>                 52d   v1.22.0
server25   Ready    <none>                 52d   v1.22.0
server26   Ready    <none>                 52d   v1.22.0
server27   Ready    <none>                 52d   v1.22.0
server63   Ready    control-plane,master   52d   v1.22.0
server64   Ready    <none>                 52d   v1.22.0
server65   Ready    control-plane,master   52d   v1.22.0
server66   Ready    <none>                 52d   v1.22.0
server83   Ready    control-plane,master   52d   v1.22.0
server84   Ready    <none>                 52d   v1.22.0
server85   Ready    <none>                 52d   v1.22.0
server86   Ready    <none>                 52d   v1.22.0

Removing / draining a node¶

Usually kubectl drain server should do the job, but sometimes we need to be more aggressive:

kubectl drain --delete-emptydir-data --ignore-daemonsets server23

Readding a node after draining¶

kubectl uncordon serverXX

Rook / Ceph Related Operations¶

Inspecting the logs of a specific server¶

# Get the related pods
kubectl -n rook-ceph get pods -l app=rook-ceph-osd-prepare 
...

# Inspect the logs of a specific pod
kubectl -n rook-ceph logs -f rook-ceph-osd-prepare-server23--1-444qx

Triggering server prepare / adding new osds¶

The rook-ceph-operator triggers/watches/creates pods to maintain hosts. To trigger a full "re scan", simply delete that pod:

kubectl -n rook-ceph delete pods -l app=rook-ceph-operator

This will cause all the rook-ceph-osd-prepare-.. jobs to be recreated and thus OSDs to be created, if new disks have been added.

Removing an OSD¶

• See Ceph OSD Management

Infrastructure versions¶

ungleich kubernetes infrastructure v3¶

• rook is now installed via helm via argocd instead of directly via manifests

ungleich kubernetes infrastructure v2¶

• Replaced fluxv2 from ungleich k8s v1 with argocd
  • argocd can apply helm templates directly without needing to go through Chart releases
• We are also using argoflow for build flows
• Planned to add kaniko for image building

ungleich kubernetes infrastructure v1¶

We are using the following components:

• Calico as a CNI with BGP, IPv6 only, no encapsulation
  • Needed for basic networking
• kubernetes-secret-generator for creating secrets
  • Needed so that secrets are not stored in the git repository, but only in the cluster
• ungleich-certbot
  • Needed to get letsencrypt certificates for services
• rook with ceph rbd + cephfs for storage
  • rbd for almost everything, ReadWriteOnce
  • cephfs for smaller things, multi access ReadWriteMany
  • Needed for providing persistent storage
• flux v2
  • Needed to manage resources automatically