The ungleich routing infrastructure » History » Revision 2
« Previous |
Revision 2/12
(diff)
| Next »
Nico Schottelius, 05/15/2019 03:56 PM
The ungleich routing infrastructure¶
Status¶
This article is IN PROGRESS.
Peer with us!¶
If you have a VM / IPv6 network from us and want to peer with us, the following steps should help you:
- Send a request to support
atungleich.ch containing your- ASN
- Networks
ungleich routers¶
To BGP peer with us, you will need to establish 2 BGP sessions (for redundancy reasons). The routers depend on the IPv6 that your endpoint has:
Your VM is in ... | ... then peer with |
2a0a:e5c0:0:2::/64 | 2a0a:e5c0:0:2::3 2a0a:e5c0:0:2::4 |
2a0a:e5c0:0:5::/64 | 2a0a:e5c0:0:5::3 2a0a:e5c0:0:5::4 |
2a0a:e5c0:2:2::/64 | 2a0a:e5c0:2:2::5 2a0a:e5c0:2:2::6 |
You will receive the full IPv6 routing table from us.
RIPE¶
Our networks are registered with ripe.
Maintainer¶
All objects should have the mnt-by flag of mnt-ungleich. This maintainer handle is usable by all our LIR accounts.
CLI¶
A cli for accessing RIPE's rest interface is developed on https://code.ungleich.ch/ungleich-public/ungleich-cli
Updated by Nico Schottelius over 5 years ago · 2 revisions