Task #6983: Setup networking for bluecmd/mainframe - Open Infrastructure - ungleich redmine

Actions

Copy link

Task #6983

closed

Setup networking for bluecmd/mainframe

Added by Nico Schottelius almost 5 years ago. Updated over 4 years ago.

Status:

Closed

Priority:

Normal

Assignee:

ll nu

Target version:

Start date:

07/18/2019

Due date:

% Done:

Estimated time:

PM Check date:

Description

vlan 26/27 as additionaly
- needs to create bond0.25 on routers as well
Network: 2a0a:e5c0:6::/48
Transfer network: 2a0a:e5c0:1:9::/64
- Endpoint ungleich: 2a0a:e5c0:1:9::7
- Endpoint bluecmd: 2a0a:e5c0:1:9::1

VLANs that go to VM 24555¶

Create bond0.X interfaces on all place6 servers
Create networks in opennebula (L2 only)
Connect networks to the VM
VLAN ids are in [[datacenterlight:Networking]]

Actions

Copy link

Updated by Nico Schottelius over 4 years ago

Description updated (diff)

Actions

Copy link

Updated by Nico Schottelius over 4 years ago

Description updated (diff)
Status changed from New to In Progress

To be done

Tasks done:

Create interface bond0.25 on routers
- ~~Update cdist config~~
- ~~Apply to routers using cdist~~
~~Create vlans {25,26,27} on switches in place6~~
- 25 = bluecmd-public
- 26 = bluecmd-mgmt
- 27 = bluecmd-storage
~~Configure trunk ports on switch1, switch2 and set allowed vlans to 25,26,27~~
- ~~Port: 31 on both switches (verify using show interface status)~~
Routing
- ~~Updated keepalived configuration in cdist to provide :7 address~~
- ~~Add route for 2a0a:e5c0:6::/48 in the bgp configuration~~
VM VLANs
- Create networks in opennebula on bond0: tag 26,27
- No IP addresses
- Attach one interface of each to the VM 24555

Actions

Copy link

Updated by ll nu over 4 years ago

switches in place6

switch 1 and 2

!
vlan 25
name bluecmd-public
!
vlan 26
name bluecmd-mgmt
!
vlan 27
name bluecmd-storage
!
interface Ethernet31
switchport trunk allowed vlan 25-27
switchport mode trunk