Actions
Task #7242
closedTest active-active IPv6/IPv4 configurations on routers
Start date:
10/20/2019
Due date:
% Done:
0%
Estimated time:
PM Check date:
Description
- To be able to run w/o keepalived
Updated by Nico Schottelius almost 5 years ago
- Status changed from New to In Progress
- Set IP "185.203.114.50" to hold in opennebula -> can use it for testing
router1:~# ip addr add 185.203.114.50/24 dev bond0.12 [16:39:59] router2.place6:~# ip addr add 185.203.114.50/24 dev bond0.12
pinging from 185.203.114.245
root@devuan:~# ping -c3 185.203.114.50 PING 185.203.114.50 (185.203.114.50) 56(84) bytes of data. 64 bytes from 185.203.114.50: icmp_seq=1 ttl=64 time=0.994 ms 64 bytes from 185.203.114.50: icmp_seq=2 ttl=64 time=0.377 ms 64 bytes from 185.203.114.50: icmp_seq=3 ttl=64 time=0.317 ms --- 185.203.114.50 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 10ms rtt min/avg/max/mdev = 0.317/0.562/0.994/0.307 ms root@devuan:~# ip neigh show | grep 185.203.114.50 185.203.114.50 dev eth1 lladdr 00:1b:21:bc:7c:7a REACHABLE root@devuan:~#
Removing the IP address from the router that is in the cache and then checking how long it takes until failover
64 bytes from 185.203.114.50: icmp_seq=9 ttl=64 time=0.526 ms 64 bytes from 185.203.114.50: icmp_seq=10 ttl=64 time=0.824 ms 64 bytes from 185.203.114.50: icmp_seq=11 ttl=64 time=0.421 ms 64 bytes from 185.203.114.50: icmp_seq=12 ttl=64 time=0.316 ms 64 bytes from 185.203.114.50: icmp_seq=13 ttl=64 time=0.619 ms From 185.203.114.10: icmp_seq=14 Redirect Host(New nexthop: 185.203.114.50) 64 bytes from 185.203.114.50: icmp_seq=14 ttl=64 time=1.07 ms From 185.203.114.10: icmp_seq=15 Redirect Host(New nexthop: 185.203.114.50)
Practically seen no packet loss on failover in IPv4 -> assignment on both works.
Updated by Nico Schottelius almost 5 years ago
v6 based test w/ dad ignorance on:
[17:03:48] router2.place6:~# cat /proc/sys/net/ipv6/conf/bond0.12/accept_dad 1 [17:04:49] router2.place6:~# echo 0 > /proc/sys/net/ipv6/conf/bond0.12/accept_dad [17:05:03] router2.place6:~# router1:~# cat /proc/sys/net/ipv6/conf/bond0.12/accept_dad 1 router1:~# echo 0 > /proc/sys/net/ipv6/conf/bond0.12/accept_dad router1:~#
[17:04:49] router2.place6:~# echo 0 > /proc/sys/net/ipv6/conf/bond0.12/accept_dad [17:05:03] router2.place6:~# ip addr add 2a0a:e5c0:2:2::53/64 dev bond0.12 [17:08:53] router2.place6:~# ip addr del 2a0a:e5c0:2:2::53/64 dev bond0.12 [17:09:15] router2.place6:~# ip addr add 2a0a:e5c0:2:2::53/64 dev bond0.12 [17:09:26] router2.place6:~# ip addr del 2a0a:e5c0:2:2::53/64 dev bond0.12 [17:09:46] router2.place6:~# ip addr del 2a0a:e5c0:2:2::53/64 dev bond0.12 router1:~# ip addr add 2a0a:e5c0:2:2::53/64 dev bond0.12 router1:~# ip addr del 2a0a:e5c0:2:2::53/64 dev bond0.12 router1:~# ip addr add 2a0a:e5c0:2:2::53/64 dev bond0.12 router1:~#
Also works fine. Now we only need to automate it.
Updated by Nico Schottelius 10 months ago
- Status changed from In Progress to Closed
Actions