How to set up network equipment for customers » History » Version 2
Nico Schottelius, 04/30/2020 05:50 PM
1 | 1 | Nico Schottelius | h1. How to set up network equipment for customers |
---|---|---|---|
2 | |||
3 | 2 | Nico Schottelius | h2. Status |
4 | |||
5 | This document is **PRE PRODUCTION**. |
||
6 | |||
7 | 1 | Nico Schottelius | h2. Selecting IPv6 addresses |
8 | |||
9 | * Every customer gets a /48 from "2a0a:e5c0:400::/40":https://netbox.ungleich.ch/ipam/prefixes/211/ |
||
10 | ** This way we can easily route it later |
||
11 | * Select / create a /64 for each network of the customer |
||
12 | * Also register a "management IPv6 address" (usually @...:42@) that we can use for testing/debugging |
||
13 | |||
14 | h2. Setting up passwords |
||
15 | |||
16 | * If we fully maintain the equipment and/or the customer is tech savvy: |
||
17 | ** Generate a fully random 32 character password |
||
18 | * If we or the customer need to enter the password by hand |
||
19 | ** Create a passphrase |
||
20 | ** Lower case only |
||
21 | ** At least 4 words, at least 32 characters |
||
22 | * Hand over password via a secure channel |
||
23 | ** Telling in person |
||
24 | * If we maintain the equipment: save the password in the password store |