How to use the IPv4-to-IPv6-Proxy » History » Version 4
Nico Schottelius, 11/16/2019 01:07 PM
| 1 | 1 | Nico Schottelius | h1. How to use the IPv4-to-IPv6-Proxy |
|---|---|---|---|
| 2 | |||
| 3 | {{toc}} |
||
| 4 | |||
| 5 | h2. Status |
||
| 6 | |||
| 7 | This document is *PRE PRODUCTION*. |
||
| 8 | |||
| 9 | h2. Introduction |
||
| 10 | |||
| 11 | To enable IPv6 only VMs to be accessible from the IPv4 Internet, we have an IPv4-to-IPv6 proxy. |
||
| 12 | |||
| 13 | 3 | Nico Schottelius | h2. How to use it (as a customer) |
| 14 | |||
| 15 | * Configure / setup your website to be reachable by IPv6 |
||
| 16 | * Ensure that your domain name has an AAAA entry pointing to your website |
||
| 17 | * Inform the ungleich team via support -at- ungleich.ch about your domain |
||
| 18 | * Our team will setup the proxy to whitelist your domain |
||
| 19 | * Setup an A entry for your domain(s) pointing to 185.203.112.54 |
||
| 20 | 1 | Nico Schottelius | |
| 21 | h2. Technical details / how to maintain it |
||
| 22 | 2 | Nico Schottelius | |
| 23 | * It's configured by cdist, type @__ungleich_haproxy@ |
||
| 24 | * To add a domain, edit manifest/ungleich |
||
| 25 | ** Find ipv6-proxy.ungleich.ch |
||
| 26 | ** Verify that the domain has an AAAA entry |
||
| 27 | ** Add the domain using the "--v4proxy DOMAIN" parameter |
||
| 28 | 4 | Nico Schottelius | ** Commit in git, push |
| 29 | * Run cdist: @cdist config ipv6-proxy.ungleich.ch@ |