The ungleich VPN infrastructure¶

• Table of contents
• The ungleich VPN infrastructure
  • Status
  • Wireguard on vpn-2a0ae5c1.ungleich.ch
    • How to add a new customer connection
    • Sample clustomer client configuration
    • Sample server configuration
  • OpenVPN on openvpn.ungleich.ch

Status¶

This document is IN PRODUCTION.

Wireguard on vpn-2a0ae5c1.ungleich.ch¶

• Server: vpn-2a0ae5c1.ungleich.ch
• Port: 51820
• Requires a public key
• Client network: 2a0a:e5c1:100::/40
• Client network size: /48

How to add a new customer connection¶

• Get the public key of the customer
• Edit dot-cdist/type/__ungleich_wireguard/manifest and add the new network definition at the end of the file
• Let the customer know their network

Sample clustomer client configuration¶

• Install wireguard
• Create your private key: umask 077; wg genkey > privkey
• Get your public key: wg pubkey < privkey
  • You need to send this pubkey to ungleich
• You will get your network definition after we have received your public key
• Create /etc/wireguard/wg0.conf

[Interface]
PrivateKey = YOURKEYHERE
ListenPort = 51280

[Peer]
PublicKey = hi60lGP+xEUQ+kVnqA7PlJAO1SVqTS1W36g0LhFP0xQ=
Endpoint = vpn-2a0ae5c1.ungleich.ch:51820
AllowedIPs = ::/0

Commands for setting it up

MY_NET=2a0a:e5c1:XXXX::1/48

ip link add dev wg0 type wireguard

# Replace with your range
ip addr add $MY_NET dev wg0

# Add routing
ip route add 2a0a:e5c1:100::/40 dev wg0
ip route add ::/0 via 2a0a:e5c1:100::1

# Configure the interface
wg setconf wg0 /etc/wireguard/wg0.conf

# Bring it up
ip link set wg0 up

Debugging

• wg show
• ping 2a0a:e5c1:100::1

Sample server configuration¶

This is just for reference - as a client you don't need this configuration

/etc/wireguard/wg0.conf:

[Interface]
ListenPort = 51820
PrivateKey = SERVERKEYHERE

# Nico, 2019-01-23
[Peer]
PublicKey = kL1S/Ipq6NkFf1MAsNRou4b9VoUsnnb4ZxgiBrH0zA8=
AllowedIPs = 2a0a:e5c1:101::/48

# Customer networks below
# ...

Sample server rc.local:

ip link add dev wg0 type wireguard
ip addr add 2a0a:e5c1:100::1/40 dev wg0
wg setconf wg0 /etc/wireguard/wg0.conf
ip link set wg0 up

OpenVPN on openvpn.ungleich.ch¶

• Server: openvpn.ungleich.ch
• Port: 1195
• Requires a certificate
• Address range: 2a0a:e5c0:3::/48
  • Client networks are /64