Project

General

Profile

The ungleich kubernetes infrastructure » History » Version 58

Nico Schottelius, 10/29/2021 09:23 AM

1 22 Nico Schottelius
h1. The ungleich kubernetes infrastructure and ungleich kubernetes manual
2 1 Nico Schottelius
3 3 Nico Schottelius
{{toc}}
4
5 1 Nico Schottelius
h2. Status
6
7 28 Nico Schottelius
This document is **pre-production**.
8
This document is to become the ungleich kubernetes infrastructure overview as well as the ungleich kubernetes manual.
9 1 Nico Schottelius
10 10 Nico Schottelius
h2. k8s clusters
11
12 48 Nico Schottelius
| Cluster         | Purpose/Setup     | Maintainer   | Master(s)                                                | argo | rook | last verified |
13
| c0.k8s.ooo      | Dev               | -            | UNUSED                                                   |      |      |    2021-10-05 |
14
| c1.k8s.ooo      | Dev p6 VM         | Nico         | 2a0a-e5c0-2-11-0-62ff-fe0b-1a3d.k8s-1.place6.ungleich.ch |      |      |    2021-10-05 |
15
| c2.k8s.ooo      | Dev p7 HW         | Nico         | server47 server53 server54                               | x    | x    |    2021-10-05 |
16
| c3.k8s.ooo      | Test p7 PI        | -            | UNUSED                                                   |      |      |    2021-10-05 |
17
| c4.k8s.ooo      | Dev2 p7 HW        | Fran/Jin-Guk | server52 server53 server54                               |      |      |             - |
18
| c5.k8s.ooo      | Dev p6 VM Amal    | Nico/Amal    | 2a0a-e5c0-2-11-0-62ff-fe0b-1a46.k8s-1.place6.ungleich.ch |      |      |               |
19
| c6.k8s.ooo      | Dev p6 VM Jin-Guk | Jin-Guk      |                                                          |      |      |               |
20
| [[p6.k8s.ooo]]  | production        |              | server67 server69 server71                               | x    | x    |    2021-10-05 |
21
| [[p10.k8s.ooo]] | production        |              | server63 server65 server83                               | x    | x    |    2021-10-05 |
22
|                 |                   |              |                                                          |      |      |               |
23
24 21 Nico Schottelius
25 1 Nico Schottelius
h2. General architecture and components overview
26
27
* All k8s clusters are IPv6 only
28
* We use BGP peering to propagate podcidr and serviceCidr networks to our infrastructure
29
* The main public testing repository is "ungleich-k8s":https://code.ungleich.ch/ungleich-public/ungleich-k8s
30 18 Nico Schottelius
** Private configurations are found in the **k8s-config** repository
31 1 Nico Schottelius
32
h3. Cluster types
33
34 28 Nico Schottelius
| **Type/Feature**            | **Development**                | **Production**         |
35
| Min No. nodes               | 3 (1 master, 3 worker)         | 5 (3 master, 3 worker) |
36
| Recommended minimum         | 4 (dedicated master, 3 worker) | 8 (3 master, 5 worker) |
37
| Separation of control plane | optional                       | recommended            |
38
| Persistent storage          | required                       | required               |
39
| Number of storage monitors  | 3                              | 5                      |
40 1 Nico Schottelius
41 43 Nico Schottelius
h2. General k8s operations
42 1 Nico Schottelius
43 46 Nico Schottelius
h3. Cheat sheet / external great references
44
45
* "kubectl cheatsheet":https://kubernetes.io/docs/reference/kubectl/cheatsheet/
46
47 44 Nico Schottelius
h3. Get the cluster admin.conf
48
49
* On the masters of each cluster you can find the file @/etc/kubernetes/admin.conf@
50
* To be able to administrate the cluster you can copy the admin.conf to your local machine
51
* Multi cluster debugging can very easy if you name the config ~/cX-admin.conf (see example below)
52
53
<pre>
54
% scp root@server47.place7.ungleich.ch:/etc/kubernetes/admin.conf ~/c2-admin.conf
55
% export KUBECONFIG=~/c2-admin.conf    
56
% kubectl get nodes
57
NAME       STATUS                     ROLES                  AGE   VERSION
58
server47   Ready                      control-plane,master   82d   v1.22.0
59
server48   Ready                      control-plane,master   82d   v1.22.0
60
server49   Ready                      <none>                 82d   v1.22.0
61
server50   Ready                      <none>                 82d   v1.22.0
62
server59   Ready                      control-plane,master   82d   v1.22.0
63
server60   Ready,SchedulingDisabled   <none>                 82d   v1.22.0
64
server61   Ready                      <none>                 82d   v1.22.0
65
server62   Ready                      <none>                 82d   v1.22.0               
66
</pre>
67
68 18 Nico Schottelius
h3. Installing a new k8s cluster
69 8 Nico Schottelius
70 9 Nico Schottelius
* Decide on the cluster name (usually *cX.k8s.ooo*), X counting upwards
71 28 Nico Schottelius
** Using pXX.k8s.ooo for production clusters of placeXX
72 9 Nico Schottelius
* Use cdist to configure the nodes with requirements like crio
73
* Decide between single or multi node control plane setups (see below)
74 28 Nico Schottelius
** Single control plane suitable for development clusters
75 9 Nico Schottelius
76 28 Nico Schottelius
Typical init procedure:
77 9 Nico Schottelius
78 28 Nico Schottelius
* Single control plane: @kubeadm init --config bootstrap/XXX/kubeadm.yaml@
79
* Multi control plane (HA): @kubeadm init --config bootstrap/XXX/kubeadm.yaml --upload-certs@
80 10 Nico Schottelius
81 29 Nico Schottelius
h3. Deleting a pod that is hanging in terminating state
82
83
<pre>
84
kubectl delete pod <PODNAME> --grace-period=0 --force --namespace <NAMESPACE>
85
</pre>
86
87
(from https://stackoverflow.com/questions/35453792/pods-stuck-in-terminating-status)
88
89 42 Nico Schottelius
h3. Listing nodes of a cluster
90
91
<pre>
92
[15:05] bridge:~% kubectl get nodes
93
NAME       STATUS   ROLES                  AGE   VERSION
94
server22   Ready    <none>                 52d   v1.22.0
95
server23   Ready    <none>                 52d   v1.22.2
96
server24   Ready    <none>                 52d   v1.22.0
97
server25   Ready    <none>                 52d   v1.22.0
98
server26   Ready    <none>                 52d   v1.22.0
99
server27   Ready    <none>                 52d   v1.22.0
100
server63   Ready    control-plane,master   52d   v1.22.0
101
server64   Ready    <none>                 52d   v1.22.0
102
server65   Ready    control-plane,master   52d   v1.22.0
103
server66   Ready    <none>                 52d   v1.22.0
104
server83   Ready    control-plane,master   52d   v1.22.0
105
server84   Ready    <none>                 52d   v1.22.0
106
server85   Ready    <none>                 52d   v1.22.0
107
server86   Ready    <none>                 52d   v1.22.0
108
</pre>
109
110
111 41 Nico Schottelius
h3. Removing / draining a node
112
113
Usually @kubectl drain server@ should do the job, but sometimes we need to be more aggressive:
114
115
<pre>
116
kubectl drain --delete-emptydir-data --ignore-daemonsets server23
117 42 Nico Schottelius
</pre>
118
119
h3. Readding a node after draining
120
121
<pre>
122
kubectl uncordon serverXX
123 1 Nico Schottelius
</pre>
124 43 Nico Schottelius
125 50 Nico Schottelius
h3. (Re-)joining worker nodes after creating the cluster
126 49 Nico Schottelius
127
* We need to have an up-to-date token
128
* We use different join commands for the workers and control plane nodes
129
130
Generating the join command on an existing control plane node:
131
132
<pre>
133
kubeadm token create --print-join-command
134
</pre>
135
136 50 Nico Schottelius
h3. (Re-)joining control plane nodes after creating the cluster
137 1 Nico Schottelius
138 50 Nico Schottelius
* We generate the token again
139
* We upload the certificates
140
* We need to combine/create the join command for the control plane node
141
142
Example session:
143
144
<pre>
145
% kubeadm token create --print-join-command
146
kubeadm join p10-api.k8s.ooo:6443 --token xmff4i.ABC --discovery-token-ca-cert-hash sha256:longhash 
147
148
% kubeadm init phase upload-certs --upload-certs
149
[upload-certs] Storing the certificates in Secret "kubeadm-certs" in the "kube-system" Namespace
150
[upload-certs] Using certificate key:
151
CERTKEY
152
153
# Then we use these two outputs on the joining node:
154
155
kubeadm join p10-api.k8s.ooo:6443 --token xmff4i.ABC --discovery-token-ca-cert-hash sha256:longhash --control-plane --certificate-key CERTKEY
156
</pre>
157
158
Commands to be used on a control plane node:
159
160
<pre>
161
kubeadm token create --print-join-command
162
kubeadm init phase upload-certs --upload-certs
163
</pre>
164
165
Commands to be used on the joining node:
166
167
<pre>
168
JOINCOMMAND --control-plane --certificate-key CERTKEY
169
</pre>
170 49 Nico Schottelius
171 51 Nico Schottelius
SEE ALSO
172
173
* https://stackoverflow.com/questions/63936268/how-to-generate-kubeadm-token-for-secondary-control-plane-nodes
174
* https://blog.scottlowe.org/2019/08/15/reconstructing-the-join-command-for-kubeadm/
175
176 53 Nico Schottelius
h3. How to fix etcd does not start when rejoining a kubernetes cluster as a control plane
177 52 Nico Schottelius
178
If during the above step etcd does not come up, @kubeadm join@ can hang as follows:
179
180
<pre>
181
[control-plane] Creating static Pod manifest for "kube-apiserver"                                                              
182
[control-plane] Creating static Pod manifest for "kube-controller-manager"                                                     
183
[control-plane] Creating static Pod manifest for "kube-scheduler"                                                              
184
[check-etcd] Checking that the etcd cluster is healthy                                                                         
185
error execution phase check-etcd: etcd cluster is not healthy: failed to dial endpoint https://[2a0a:e5c0:10:1:225:b3ff:fe20:37
186
8a]:2379 with maintenance client: context deadline exceeded                                                                    
187
To see the stack trace of this error execute with --v=5 or higher         
188
</pre>
189
190
Then the problem is likely that the etcd server is still a member of the cluster. We first need to remove it from the etcd cluster and then the join works.
191
192
To fix this we do:
193
194
* Find a working etcd pod
195
* Find the etcd members / member list
196
* Remove the etcd member that we want to re-join the cluster
197
198
199
<pre>
200
# Find the etcd pods
201
kubectl -n kube-system get pods -l component=etcd,tier=control-plane
202
203
# Get the list of etcd servers with the member id 
204
kubectl exec -n kube-system -ti ETCDPODNAME -- etcdctl --endpoints '[::1]:2379' --cacert /etc/kubernetes/pki/etcd/ca.crt --cert  /etc/kubernetes/pki/etcd/server.crt --key /etc/kubernetes/pki/etcd/server.key member list
205
206
# Remove the member
207
kubectl exec -n kube-system -ti ETCDPODNAME -- etcdctl --endpoints '[::1]:2379' --cacert /etc/kubernetes/pki/etcd/ca.crt --cert  /etc/kubernetes/pki/etcd/server.crt --key /etc/kubernetes/pki/etcd/server.key member remove MEMBERID
208
</pre>
209
210
Sample session:
211
212
<pre>
213
[10:48] line:~% kubectl -n kube-system get pods -l component=etcd,tier=control-plane
214
NAME            READY   STATUS    RESTARTS     AGE
215
etcd-server63   1/1     Running   0            3m11s
216
etcd-server65   1/1     Running   3            7d2h
217
etcd-server83   1/1     Running   8 (6d ago)   7d2h
218
[10:48] line:~% kubectl exec -n kube-system -ti etcd-server65 -- etcdctl --endpoints '[::1]:2379' --cacert /etc/kubernetes/pki/etcd/ca.crt --cert  /etc/kubernetes/pki/etcd/server.crt --key /etc/kubernetes/pki/etcd/server.key member list
219
356891cd676df6e4, started, server65, https://[2a0a:e5c0:10:1:225:b3ff:fe20:375c]:2380, https://[2a0a:e5c0:10:1:225:b3ff:fe20:375c]:2379, false
220
371b8a07185dee7e, started, server63, https://[2a0a:e5c0:10:1:225:b3ff:fe20:378a]:2380, https://[2a0a:e5c0:10:1:225:b3ff:fe20:378a]:2379, false
221
5942bc58307f8af9, started, server83, https://[2a0a:e5c0:10:1:3e4a:92ff:fe79:bb98]:2380, https://[2a0a:e5c0:10:1:3e4a:92ff:fe79:bb98]:2379, false
222
223
[10:48] line:~% kubectl exec -n kube-system -ti etcd-server65 -- etcdctl --endpoints '[::1]:2379' --cacert /etc/kubernetes/pki/etcd/ca.crt --cert  /etc/kubernetes/pki/etcd/server.crt --key /etc/kubernetes/pki/etcd/server.key member remove 371b8a07185dee7e
224
Member 371b8a07185dee7e removed from cluster e3c0805f592a8f77
225 1 Nico Schottelius
226
</pre>
227
228
SEE ALSO
229
230
* We found the solution using https://stackoverflow.com/questions/67921552/re-installed-node-cannot-join-kubernetes-cluster
231 56 Nico Schottelius
232
h2. ArgoCD / ArgoFlow
233
234
h3. Get the argocd credentials
235
236
<pre>
237
kubectl -n argocd get secret argocd-initial-admin-secret -o jsonpath="{.data.password}" | base64 -d; echo ""
238
</pre>
239
240
241 52 Nico Schottelius
242 55 Nico Schottelius
h2. Helm related operations
243
244
h3. Installing a helm chart
245
246
One can use the usual pattern of
247
248
<pre>
249
helm install <releasename> <chartdirectory>
250
</pre>
251
252
However often you want to reinstall/update when testing helm charts. The following pattern is "better", because it allows you to reinstall, if it is already installed:
253
254
<pre>
255
helm upgrade --install <releasename> <chartdirectory>
256
</pre>
257
258
259
260 43 Nico Schottelius
h2. Rook / Ceph Related Operations
261
262
h3. Inspecting the logs of a specific server
263
264
<pre>
265
# Get the related pods
266
kubectl -n rook-ceph get pods -l app=rook-ceph-osd-prepare 
267
...
268
269
# Inspect the logs of a specific pod
270
kubectl -n rook-ceph logs -f rook-ceph-osd-prepare-server23--1-444qx
271
272
</pre>
273
274
h3. Triggering server prepare / adding new osds
275
276
The rook-ceph-operator triggers/watches/creates pods to maintain hosts. To trigger a full "re scan", simply delete that pod:
277
278
<pre>
279
kubectl -n rook-ceph delete pods -l app=rook-ceph-operator
280
</pre>
281
282
This will cause all the @rook-ceph-osd-prepare-..@ jobs to be recreated and thus OSDs to be created, if new disks have been added.
283
284
h3. Removing an OSD
285
286
* See "Ceph OSD Management":https://rook.io/docs/rook/v1.7/ceph-osd-mgmt.html
287 41 Nico Schottelius
288 1 Nico Schottelius
h2. Infrastructure versions
289 35 Nico Schottelius
290 57 Nico Schottelius
h3. ungleich kubernetes infrastructure v5 (2021-10)
291 1 Nico Schottelius
292 57 Nico Schottelius
Clusters are configured / setup in this order:
293
294
* Bootstrap via kubeadm
295
* Networking via calico + BGP (non ECMP)
296
* ArgoCD for CD with k8s-config repository controls all installed components
297 58 Nico Schottelius
** rook for storage via argocd
298
** haproxy for in IPv6-cluster-IPv4-to-IPv6 proxy via argocd
299
** "kubernetes-secret-generator for in cluster secrets":https://github.com/mittwald/kubernetes-secret-generator
300
** "ungleich-certbot managing certs and nginx":https://hub.docker.com/repository/docker/ungleich/ungleich-certbot
301
302 57 Nico Schottelius
303
h3. ungleich kubernetes infrastructure v4 (2021-09)
304
305 54 Nico Schottelius
* rook is configured via manifests instead of using the rook-ceph-cluster helm chart
306 1 Nico Schottelius
* The rook operator is still being installed via helm
307 35 Nico Schottelius
308 57 Nico Schottelius
h3. ungleich kubernetes infrastructure v3 (2021-07)
309 1 Nico Schottelius
310 10 Nico Schottelius
* rook is now installed via helm via argocd instead of directly via manifests
311 28 Nico Schottelius
312 57 Nico Schottelius
h3. ungleich kubernetes infrastructure v2 (2021-05)
313 28 Nico Schottelius
314
* Replaced fluxv2 from ungleich k8s v1 with argocd
315 1 Nico Schottelius
** argocd can apply helm templates directly without needing to go through Chart releases
316 28 Nico Schottelius
* We are also using argoflow for build flows
317
* Planned to add "kaniko":https://github.com/GoogleContainerTools/kaniko for image building
318
319 57 Nico Schottelius
h3. ungleich kubernetes infrastructure v1 (2021-01)
320 28 Nico Schottelius
321
We are using the following components:
322
323
* "Calico as a CNI":https://www.projectcalico.org/ with BGP, IPv6 only, no encapsulation
324
** Needed for basic networking
325
* "kubernetes-secret-generator":https://github.com/mittwald/kubernetes-secret-generator for creating secrets
326
** Needed so that secrets are not stored in the git repository, but only in the cluster
327
* "ungleich-certbot":https://hub.docker.com/repository/docker/ungleich/ungleich-certbot
328
** Needed to get letsencrypt certificates for services
329
* "rook with ceph rbd + cephfs":https://rook.io/ for storage
330
** rbd for almost everything, *ReadWriteOnce*
331
** cephfs for smaller things, multi access *ReadWriteMany*
332
** Needed for providing persistent storage
333
* "flux v2":https://fluxcd.io/
334
** Needed to manage resources automatically