Open Infrastructure

h1. The ungleich monitoring infrastructure

{{>toc}}

h2. Introduction

We use the following technology / products for the monitoring:

* consul (service discovery)

* prometheus (exporting, gathering, alerting)

* Grafana (presenting)

Prometheus and grafana are located on the monitoring control machines

* monitoring.place5.ungleich.ch

* monitoring.place6.ungleich.ch

h2. Consul

We use a consul cluster for each datacenter (e.g. place5 and place6). 

The servers are located on the physical machines (red{1..3} resp. black{1..3}) and the agents are running on all other monitored machines (such as servers and VMs)

consul is configured to publish the service its host is providing (e.g. the exporters)

There is a inter-datacenter communication (wan gossip) [https://www.consul.io/docs/guides/datacenters.html]

h2. Prometheus

Prometheus is responsible to get all data out (exporters) of the monitored host and store them. Also to send out alerts if needed (alertmanager)

h3. Exporters

* Node (host specific metrics (e.g. CPU-, RAM-, Disk-usage..))

* Ceph (Ceph specific metrics (e.g. pool usage, osds ..))

* blackbox (Metrics about online state of http/https services)

The node exporter is located on all monitored hosts

Ceph exporter is porvided by ceph itself and is located on the ceph manager.

The blackbox exporter is located on the monitoring control machine itself.

h3. Alerts

We configured the following alerts:

* ceph osds down

* ceph health state is not OK

* ceph quorum not OK

* ceph pool disk usage too high

* ceph disk usage too high

* instance down

* disk usage too high

* Monitored website down

h2. Grafana

Grafana provides dashboards for the following:

* Node (metrics about CPU-, RAM-, Disk and so on usage)

* blackbox (metrics about the blackbox exporter)

* ceph (important metrics from the ceph exporter)

h3. Authentication

The grafana authentication works over ldap. (See [[The ungleich LDAP guide]])

All users in the @devops@ group will be mapped to the Admin role, all other users will be Viewers

h2. Monit

We use "monit":https://mmonit.com/ for monitoring and restarting daemons. See `__ungleich_monit` type in dot-cdist.

h2. Misc

* You're probably looking for the `__dcl_monitoring_server` type, which centralize a bunch of stuff.

* This page needs some love!

h2. Service/Customer monitoring

* A few blackbox things can be found on the datacenter monitoring infrastructure.

* There's a new prometheus+grafana setup at https://service-monitoring.ungleich.ch/, deployed by @fnux for Matrix-as-a-Service monitoring. At time of writing, it also monitors the VPN server and staticwebhosting. No alertmanager yet. Partially manual.

h2. Monitoring Guide

h3. Configuring prometheus

Use @promtool check config@ to verify the configuration.

<pre>

[21:02:48] server1.place11:~# promtool check config /etc/prometheus/prometheus.yml 

Checking /etc/prometheus/prometheus.yml

  SUCCESS: 4 rule files found

Checking /etc/prometheus/blackbox.rules

  SUCCESS: 3 rules found

Checking /etc/prometheus/ceph-alerts.rules

  SUCCESS: 8 rules found

Checking /etc/prometheus/node-alerts.rules

  SUCCESS: 8 rules found

Checking /etc/prometheus/uplink-monitoring.rules

  SUCCESS: 1 rules found

</pre>

h3. Querying prometheus

Use @promtool query instant@ to query values:

<pre>

[21:00:26] server1.place11:~# promtool query instant http://localhost:9090 'probe_success{dc="place5"} == 1'

probe_success{dc="place5", instance="193.192.225.73", job="routers-place5", protocol="ipv4", sensiblehostname="router1"} => 1 @[1593889492.577]

probe_success{dc="place5", instance="195.141.230.103", job="routers-place5", protocol="ipv4", sensiblehostname="router2"} => 1 @[1593889492.577]

probe_success{dc="place5", instance="2001:1700:3500::12", job="routers-place5", protocol="ipv6", sensiblehostname="router2"} => 1 @[1593889492.577]

probe_success{dc="place5", instance="2001:1700:3500::2", job="routers-place5", protocol="ipv6", sensiblehostname="router1"} => 1 @[1593889492.577]

</pre>

h3. Using Grafana

* Username for changing items: "admin"

* Username for viewing dashboards: "ungleich"

* Passwords in the password store

h3. Managing alerts

* Read https://prometheus.io/docs/practices/alerting/ as an introduction

* Use @amtool@

Showing current alerts:

<pre>

[14:54:35] monitoring.place6:~# amtool alert query

Alertname            Starts At                 Summary                                                               

InstanceDown         2020-07-01 10:24:03 CEST  Instance red1.place5.ungleich.ch down                                 

InstanceDown         2020-07-01 10:24:03 CEST  Instance red3.place5.ungleich.ch down                                 

InstanceDown         2020-07-05 12:51:03 CEST  Instance apu-router2.place5.ungleich.ch down                          

UngleichServiceDown  2020-07-05 13:51:19 CEST  Ungleich internal service https://staging.swiss-crowdfunder.com down  

InstanceDown         2020-07-05 13:55:33 CEST  Instance https://swiss-crowdfunder.com down                           

CephHealthSate       2020-07-05 13:59:49 CEST  Ceph Cluster is not healthy.                                          

LinthalHigh          2020-07-05 14:01:41 CEST  Temperature on risinghf-19 is 32.10012512207032                       

[14:54:41] monitoring.place6:~# 

</pre>

Silencing alerts:

<pre>

[14:59:45] monitoring.place6:~# amtool silence add -c "Ceph is actually fine" alertname=CephHealthSate

4a5c65ff-4af3-4dc9-a6e0-5754b00cd2fa

[15:00:06] monitoring.place6:~# amtool silence query

ID                                    Matchers                  Ends At                  Created By  Comment                

4a5c65ff-4af3-4dc9-a6e0-5754b00cd2fa  alertname=CephHealthSate  2020-07-05 14:00:06 UTC  root        Ceph is actually fine  

[15:00:13] monitoring.place6:~# 

</pre>

Better using author and co. TOBEFIXED