Project

General

Profile

The ungleich routing infrastructure » History » Revision 3

Revision 2 (Nico Schottelius, 05/15/2019 03:56 PM) → Revision 3/12 (Nico Schottelius, 05/15/2019 03:56 PM)

h1. The ungleich routing infrastructure 

 h2. Status 

 This article is *IN PROGRESS*. 

 h2. Peer with us! 

 If you have a VM / IPv6 network from us and want to peer with us, the following steps should help you: 

 * Send a request to support -at- ungleich.ch containing your 
 ** ASN 
 ** Networks 

 h3. ungleich routers 

 To BGP peer with us, you will need to establish 2 BGP sessions (for redundancy reasons). The routers depend on the IPv6 that your endpoint has: 

 |_. | Your VM is in ... |_. | ... then peer with | 
 | 2a0a:e5c0:0:2::/64 | 2a0a:e5c0:0:2::3 2a0a:e5c0:0:2::4 | 
 | 2a0a:e5c0:0:5::/64 | 2a0a:e5c0:0:5::3 2a0a:e5c0:0:5::4 | 
 | 2a0a:e5c0:2:2::/64 | 2a0a:e5c0:2:2::5 2a0a:e5c0:2:2::6 | 

 You will receive the full IPv6 routing table from us. 


 h2. RIPE 

 Our networks are registered with ripe. 

 h3. Maintainer 

 All objects should have the *mnt-by* flag of *mnt-ungleich*. This maintainer handle is usable by all our LIR accounts. 


 h3. CLI 

 A cli for accessing RIPE's rest interface is developed on https://code.ungleich.ch/ungleich-public/ungleich-cli