Task #6651
closedTask #6557: Rebuild the whole DCL infrastructure - aka place9
The network documentation ticket
0%
Description
- Add your network separation in here / define which network is what
- You have a /48, you need to partition into /64s on your own
| 2a0a:e5c0:1:7::19 | switch1-place9 |
| 2a0a:e5c0:107:2::/64 | server |
| 2a0a:e5c0:107:3::/64 | co-working |
| 2a0a:e5c0:107:4::/64 | internal |
Updated by Samuel Hailu almost 5 years ago
- Description updated (diff)
2a0a:e5c0:107::/48 (Routed-Network)
similar manner altering 4th section gives me /64s
The following are the networks
2a0a:e5c0:107:1::/64 > internal
2a0a:e5c0:107:2::/64 > server
2a0a:e5c0:107:3::/64 ==> coworking
Updated by Nico Schottelius almost 5 years ago
Good! If you correctly configure your router now, IPs in the networks will automatically be reachable!
Updated by ll nu almost 5 years ago
Temporarily confed switch5 and 6 in place6, to switchport access vlan 15 (coworking) on port channel 33, because
there is no uplink configured by default on vlan 21 dcl-rebuild,
i cannot access 2a0a:e5c0:1:7::27 from 2a0a:e5c0:1:7:83d:7d54:b9c4:b0d9/64
where is this router btw? i couldnt find it in the docs, (varp?)
Updated by ll nu almost 5 years ago
nyeeh
interface Vlan1
ipv6 address 2a0a:e5c0:1:7::27/64
removed from switch1
these advertisers are dangerous
Updated by Nico Schottelius over 4 years ago
@llnu: did you put the original vlan tag for place 9 back on it?
Updated by ll nu over 4 years ago
yup, reconfed
interface Port-Channel33
switchport access vlan 21
mlag 33
but im getting no ip
Updated by Samuel Hailu over 3 years ago
- Status changed from Seen to Resolved
- Assignee changed from Samuel Hailu to Nico Schottelius
Updated by Nico Schottelius over 3 years ago
- Status changed from Resolved to Closed