Activity
From 04/02/2019 to 05/01/2019
05/01/2019
- NS 03:39 PM Task #6601 (In Progress): Setup the arista switches at place6-east and place9
- Please document how you updated the switch
- NS 03:09 PM Task #6601 (Closed): Setup the arista switches at place6-east and place9
- * It's reachable via IPv6, static route
- NS 03:33 PM Task #6652 (Closed): Install 2 Linux routers with Alpine Linux
- * Create a software raid 1 (or raid 6)
* Have mdadm running
* Install nftables
* Add public ssh keys of ungleich staff to root account
* Give both an IP address in the transfer network
- NS 03:30 PM Task #6651 (Closed): The network documentation ticket
- * Add your network separation in here / define which network is what
* You have a /48, you need to partition into /64s on your own
| 2a0a:e5c0:1:7::19 | switch1-place9 |
| 2a0a:e5c0:107:2::/64 | server |
| 2a0a:e5c0:107:... - NS 03:29 PM Task #6650 (Closed): Make Mikrotik a router for the fiber network, enable the server network (vlan), use vlan tagging on the mikrotik to be able to be a router
- Arista:
* create a new vlan
* reconfigure port of mikrotik to be a trunk port (= sending tagged frames)
Mikrotik:
* reconfigure the fiber port, make it send tagged frames
* add a new bridge for the server network
* add a new ... - NS 03:22 PM Task #6649 (Closed): Create new internal VLAN for place9 WITH a router and move servers to the internal VLAN
- Arista:
* vlan ... name ... (in arista)
Mikrotik:
* fiber = vlan 1, no tagging
* copper = internal vlan
* needs a bridge for the internal vlan
* does not need to do vlan tagging
* has ipv6 addresses on both bridges
Expect... - NS 03:19 PM Task #6648 (Closed): Configure (reset cleanly) a Mikrotik hapAC as a fiber2copper bridge, connect all servers with copper
- * Configure WiFi on it with essid = "place9"
** save password in pass, place9-dcl-rebuild/mikrotik
* Use it to bridge fiber2copper
* Connect all servers to it / another "dumb" switch
* Give it an IP address, :19 in the transfer netwo... - NS 03:08 PM Task #6559 (Closed): Understand the current networking infrustructure of place6
- NS 11:41 AM Task #6646 (Closed): Load iPXE from IPv4 and chainload ipxe configuration via IPv6
- * ipxe is loaded by IPv4
* ipxe itself only has support for IPv6
* ipxe loads configuration file via IPv6 + http from the bootserver - NS 11:39 AM Task #6645 (Closed): Setup APU as IPv6 boot server
- * Install radvd and configure
* Coordinate the network with Samuel
* Document the network in the wiki
* Setup dhcpv6 for netboot information
** dhcpv6 should not give out IPv6 addresses, but only handle netboot information - NS 11:38 AM Task #6644 (Closed): Netboot server via IPv4 / internal NIC
- * Task done when the server starts ipxe from network
- NS 11:37 AM Task #6643 (Closed): Reinstall / APU as tftp server
- * Take an APU from our stock
* Install Alpine Linux to it
* Connect eth0 to the dcl-rebuild network
* Install a DHCPv4 server
* Install a tftp server
* Configure the DHCPv4 server for netbooting
* Add the iPXE image to the tftp ser... - NS 11:33 AM Task #6437 (New): build opennebula ARM64 Packages
- NS 11:32 AM Task #5753 (New): Create Linux beginners guide
- NS 11:02 AM Task #6642 (Closed): Create iPXE image that boots in IPv6 only environment and burn it to the X520 NIC
04/30/2019
- NS 12:24 PM Task #6600 (Closed): Configure and define upstream networking
- NS 12:24 PM Task #6600: Configure and define upstream networking
- * switch2: fixed, DNS problem.
- NS 12:06 PM Task #6600: Configure and define upstream networking
- * switch2: access denied
* switch3: done
* switch4: done - NS 12:04 PM Task #6600 (In Progress): Configure and define upstream networking
- NS 12:03 PM Task #6601: Setup the arista switches at place6-east and place9
- Port 39 in switch1 is not connected:
- SH 11:57 AM Task #6601: Setup the arista switches at place6-east and place9
- How to Arista
* first reset the used Arista switch
* Set up username and password
04/29/2019
- NS 08:20 PM Task #6601: Setup the arista switches at place6-east and place9
- Note: switch1, port33 is a 1gbit trunk port -> seems not to be the right one!
- SH 03:27 PM Task #6601: Setup the arista switches at place6-east and place9
- * Correction Switch-1 Port-39 switch-1
- NS 11:58 AM Task #6601: Setup the arista switches at place6-east and place9
- Which switch on provider (=dcl old) side?
- SH 11:28 AM Task #6601: Setup the arista switches at place6-east and place9
- -* Fiber cable is in Port-33 in both sides-
- NS 03:20 PM Task #6600: Configure and define upstream networking
- * switch = :18 for the moment
- NS 10:54 AM Task #6600: Configure and define upstream networking
- ping for marc
- NS 09:48 AM Task #6600: Configure and define upstream networking
- Sami,
all network information is in here. I'll just need the switch+port combination again from your side. - NS 10:55 AM Task #6632 (Closed): Setup all servers physically and BIOS / idrac
- * Update BIOS to the latest version
* Configure BIOS correctly
** srv-io on
** dma virtualisation on
* configure raid controller
** all disks in individual raid0
* Enable IPMI with IPv6
* RAM >= 128GB working in each machine
* Di...
04/28/2019
- JK 03:12 PM Task #6598 (Closed): Add styles in account.ungleich.ch
- WC 02:09 PM Task #6598 (Resolved): Add styles in account.ungleich.ch
- WC 02:16 PM Task #6629: REST interface that supports creating users with email validation in account.ungleich.ch
- *Changing the views. Currently creating the user directly.
- WC 02:12 PM Task #6629 (Closed): REST interface that supports creating users with email validation in account.ungleich.ch
- add a REST interface that supports creating users with email validation
04/23/2019
- DR 12:03 PM Task #6613 (In Progress): upgrade dynamicweb to debian 9
- Upgraded:
* dynamicweb-development2
* dynamicweb-development
* dynamicweb-staging
The services were checked by mondi
dynamicweb-production will follow next week
04/19/2019
- DR 10:47 AM Task #6613 (Closed): upgrade dynamicweb to debian 9
- Upgrade all the dynamicweb environment from debian 8 to debian 9
affected VMs:
* dynamicweb-staging
* dynamicweb-production
* dynamicweb-development
* dynamicweb-development2
04/17/2019
- NS 04:48 PM Task #6598: Add styles in account.ungleich.ch
- What is my action required here?
- WC 04:42 PM Task #6598 (Feedback): Add styles in account.ungleich.ch
04/16/2019
- NS 11:16 AM Task #6601 (Closed): Setup the arista switches at place6-east and place9
- h2. by serial console
* update switches to latest EOS that we have
* Setup default passwords
* Connect to existing switches, understand the existing mlag configuration
** @show running@
* Setup mlag on new switches switch: switch5... - NS 11:12 AM Task #6600 (Closed): Configure and define upstream networking
- The "ISP" side
"non public" towards dcl rebuild:
* vlan = 21
public information towards dcl rebuild:
* transfer network:
** 2a0a:e5c0:1:7::/64
** default gateway for dcl-rebuild: 2a0a:e5c0:1:7::7
** dcl-rebuild router ip ...
04/14/2019
- WC 06:07 PM Task #6598 (Closed): Add styles in account.ungleich.ch
- DR 03:33 PM Task #6539 (Resolved): Fix collabora integration in nextcloud
- DR 03:33 PM Task #6539: Fix collabora integration in nextcloud
- fixed
firewalld didn't allow http, https...
04/10/2019
- NS 05:06 PM Task #6541: Monitor fans and power supplies
- Not sure if this is a good fit für Samuel
redmine@ungleich.ch writes: - JK 04:19 PM Task #6541 (In Progress): Monitor fans and power supplies
- NS 12:33 PM Task #6560 (Rejected): Define the scope of the new Product
- not sure what it is about
- SH 09:38 AM Task #6582 (Closed): Setup the first router
- * setting up one server as a router.
04/09/2019
- NS 09:57 PM Task #6581 (Closed): Document bird setup / usage
- * birdc6 show protocols
* birdc6 show interfaces
* birdc6 show route
h2. Configuration (general)
* import: add information from here into bird
* export: write routes to this protocol
h2. Filters
04/07/2019
- JK 02:54 PM Idea #6554 (Closed): Allow users to be verified in otp service with a ungleich twitter account