Activity
From 01/21/2020 to 02/19/2020
02/19/2020
- 04:07 PM Task #7560 (Closed): Document DNS64 setup for VMs
- 02:28 PM Task #7757 (Rejected): opennebula incorrectly re-uses vncs ports
- From a test VM:...
- 09:10 AM Task #7653: Move VMs with routed /64 into their own /64 [was: Instructions for adding /64 to VM]
- Moris Jones wrote:
> So in order to prevent my VM breaking on reboot, should I remove /etc/one-context.d/loc-11-dns ...
02/18/2020
- 03:08 PM Task #7560 (Feedback): Document DNS64 setup for VMs
- See https://code.ungleich.ch/ungleich-public/ungleich-staticcms/merge_requests/5/ for the article. The related wiki p...
- 10:42 AM Task #7545 (Waiting): Switch production LDAPs to cdist-managed alpine
- I cleaned up and revamped the __ungleich_ldap type to run on alpine + deployed new ldap-stagin[1,2] nodes. I'm waitin...
02/17/2020
- 02:00 PM Task #7750 (Closed): Adding v4 support to s3-rgw gateway
- TODO: switching to ipv6-proxy -> wildcard domains? performance impact?
V4 address added from Opennebula
Right...
02/08/2020
- 02:03 PM Task #7689: Update certbot on several VMs
- Updated:...
02/06/2020
- 05:56 PM Task #7696 (Closed): Alping v3.10 template bug: ntdp uses v4 only, and it breaks clock sync
- Test alpine v3.11 if clock sync works out of the box && remove alpine v3.10 template.
Check if there are vm-s/servi... - 04:13 PM Task #7653: Move VMs with routed /64 into their own /64 [was: Instructions for adding /64 to VM]
- So in order to prevent my VM breaking on reboot, should I remove /etc/one-context.d/loc-11-dns ?
02/04/2020
- 05:28 PM Task #7688: Disable rp_filter on router2.place5 (alpine sets =1 on .all and .default)
- Added the following to our internal cdist:...
- 05:19 PM Task #7688 (In Progress): Disable rp_filter on router2.place5 (alpine sets =1 on .all and .default)
- 05:15 PM Task #7688 (Closed): Disable rp_filter on router2.place5 (alpine sets =1 on .all and .default)
- ...
- 05:24 PM Task #7689 (Seen): Update certbot on several VMs
- 05:24 PM Task #7689 (Rejected): Update certbot on several VMs
- From Mail (letsencrypt):...
02/03/2020
01/31/2020
- 07:16 PM Task #7649: Sketch a VM backup & restore
- The functionality part is complete beside `ungleich-cli` and can be found at https://code.ungleich.ch/ahmedbilal/vm-c...
- 07:13 PM Task #7650: Synchronise opennebula VMs with etcd
- I changed the whole engine, so it is not slow anymore. Previously, I am using pyone library provided by OpenNebula th...
- 04:16 PM Task #7304 (Rejected): Test NAT64 with distributed routers with joold on alpine
- Active-passive
- 04:16 PM Task #7377 (Rejected): Create an active-active NAT64 gateway
- Going active-passive.
01/28/2020
- 02:38 PM Task #7650: Synchronise opennebula VMs with etcd
- Nico its done. https://code.ungleich.ch/ungleich-public/ungleich-tools/tree/master/opennebula-vm-etcd
1. Putting V... - 10:36 AM Task #7654: Get VMs info from Opennebula and save it in etcd
- ping sre team
- 10:35 AM Task #7654: Get VMs info from Opennebula and save it in etcd
- clearly a cron job.
Let's create a new (IPv6 only) service VM based on Alpine, which is
dedicated for running statel... - 09:31 AM Task #7654: Get VMs info from Opennebula and save it in etcd
- We can run it either as cron job or put a sleep in the code....
01/27/2020
- 09:29 PM Task #7654: Get VMs info from Opennebula and save it in etcd
- Where does it run / update every 10 minutes?
- 05:37 PM Task #7654: Get VMs info from Opennebula and save it in etcd
- Done
- 10:59 AM Task #7654 (Rejected): Get VMs info from Opennebula and save it in etcd
- Create a service that gets VMs' information from OpenNebula and save it in etcd.
It should also update/sync this inf... - 04:58 PM Task #7632: Setup rados / s3 storage on ceph
- ...
- 01:25 PM Task #7650: Synchronise opennebula VMs with etcd
- I actually created this ticket some time ago
01/26/2020
- 05:56 PM Task #7641: create images for uncloud
- * The image definition scripts are defined in: https://code.ungleich.ch/uncloud/images
* The images have been upload... - 10:02 AM Task #7653 (In Progress): Move VMs with routed /64 into their own /64 [was: Instructions for adding /64 to VM]
- Good point.
Timothee, can you create a new network for VMs with routed networks so that we can again decide on DNS...
01/25/2020
- 05:01 PM Task #7653 (Closed): Move VMs with routed /64 into their own /64 [was: Instructions for adding /64 to VM]
- Document process for moving VM to /64 rather than /128.
Importantly: customer should modify their name server conf...
01/24/2020
- 11:18 AM Task #7649: Sketch a VM backup & restore
- h2. OpenNebula testing...
- 11:16 AM Task #7649: Sketch a VM backup & restore
- Snapshotting:...
- 10:49 AM Task #7649: Sketch a VM backup & restore
- h2. Ceph
It seems ceph even has a limit support:... - 10:16 AM Task #7649 (Rejected): Sketch a VM backup & restore
- * User wants to have possibility to roll back in time
h2. Implementation
* We can use ceph snapshots
* We migh... - 11:08 AM Task #7650 (Rejected): Synchronise opennebula VMs with etcd
- * etcd prefix: /opennebula
*
h2. What to synchronise
* /opennebula/vm/<VM id>
** all information about the V... - 10:03 AM Task #7636: Find out current retention period for monitoring servers and ensure that data is kept for 5 years
- Go with it
redmine@ungleich.ch writes:
01/23/2020
- 10:57 PM Task #7636: Find out current retention period for monitoring servers and ensure that data is kept for 5 years
- it's configured in __dcl_monitoring_server type...
- 05:53 PM Task #7632: Setup rados / s3 storage on ceph
- Note for production checking: what happens/is required to do if the
certificate is replaced with a new one?
redmine... - 05:46 PM Task #7632: Setup rados / s3 storage on ceph
- updated conf with ssl
[client.rgw.rgw]
host = rgw
#rgw socket path = /var/run/ceph/ceph.radosgw.gateway.fastcgi.... - 05:30 PM Task #7632: Setup rados / s3 storage on ceph
- Radosgw is running. The correct way to start is1:
/usr/bin/radosgw --cluster ceph --name client.rgw.`hostname ... - 01:41 PM Task #7632: Setup rados / s3 storage on ceph
- using this manual the radosgw is configured at rgw.llnu.at
https://access.redhat.com/documentation/en-us/red_hat_c...
01/22/2020
- 03:33 PM Task #7630: Cleanup the DNS64 situation
- No. If somebody does not want that, they should remove the appropriate
script below /etc/one-contex.d
redmine@u... - 02:00 PM Task #7630: Cleanup the DNS64 situation
- What can we do about that the /etc/resolv.conf is rewritten at every reboot?
Would the best be to advise:
chattr +i... - 09:11 AM Task #7630 (Closed): Cleanup the DNS64 situation
Thanks!
redmine@ungleich.ch writes:
01/21/2020
- 09:42 PM Task #7632: Setup rados / s3 storage on ceph
redmine@ungleich.ch writes:- 07:55 PM Task #7632 (Seen): Setup rados / s3 storage on ceph
- 07:55 PM Task #7631 (Seen): Report details about pleroma problems to upstream
- 02:16 PM Task #7641 (In Progress): create images for uncloud
- 12:38 PM Task #7641 (Closed): create images for uncloud
- First images should be the latest alpine, fedora, ubuntu, debian.
How should they be configured:
they should ge... - 10:57 AM Task #7545 (In Progress): Switch production LDAPs to cdist-managed alpine
- 10:32 AM Task #7483 (In Progress): Update the __consul cdist type for alpine
- I got the same issue with `__consul_agent` on Debian, which I am currently fixing upstream.
https://code.ungleich....
Also available in: Atom