Activity
From 07/28/2019 to 08/26/2019
08/26/2019
- 02:28 PM Task #7088 (Closed): [dynamicweb] Dashboard does not include a link to reset the password
- Duplicate with #7086
- 01:57 PM Task #7088 (Closed): [dynamicweb] Dashboard does not include a link to reset the password
- 01:59 PM Task #7089 (Rejected): [dynamicweb] Implement 2FA in dynamicweb with ungleich-otp
- Here's Nico's idea to do it:
> I was wondering
>
> If we can write some javascript code
>
> that stores the ... - 01:57 PM Task #7087 (Rejected): [dynamicweb] Remove password in email and replace it with a link to set it via dashboard
- We send user's password after a user who's never registered with us, creates a VM.
Sharing passwords via email is ... - 01:18 PM Task #7032: [dynamicweb] If a user inputs an existing key in the VM buy flow, he/she is alerted that the key exists and the user can't proceed
- I tested with the key I created and saved via generate key, and above flow works as expcted.
- 01:11 PM Task #7032: [dynamicweb] If a user inputs an existing key in the VM buy flow, he/she is alerted that the key exists and the user can't proceed
- While testing, the step 1 goes to 404 error page after card submit, is this as expected? I think the error should be ...
- 12:48 PM Task #7032 (Feedback): [dynamicweb] If a user inputs an existing key in the VM buy flow, he/she is alerted that the key exists and the user can't proceed
- I proposed a fix for this issue in the merge request https://code.ungleich.ch/ungleich-public/dynamicweb/merge_reques...
- 12:00 PM Task #7032 (In Progress): [dynamicweb] If a user inputs an existing key in the VM buy flow, he/she is alerted that the key exists and the user can't proceed
- 12:57 PM Task #6978: control server ran out of inodes
- mravi 05:05
we seem to have been running out of free inodes on control.ungleich.ch -- I've removed the cdist's cac... - 12:56 PM Task #6978 (Closed): control server ran out of inodes
- 12:27 PM Task #7083: Survey Django App Installation and Test
- Nico Schottelius wrote:
> Corrected the project -> use Open Infrastructure whenever we don't have internal details t... - 08:39 AM Task #7083: Survey Django App Installation and Test
- Corrected the project -> use Open Infrastructure whenever we don't have internal details that cannot be publicly shared
- 08:12 AM Task #7083: Survey Django App Installation and Test
- Setup https://djangopackages.org/packages/p/django-survey-and-report/ as follows:
* Create a new ipv6 only VM
* Con... - 08:04 AM Task #7083 (Closed): Survey Django App Installation and Test
- Distro: Debian or Devuan
h2. Tests
* Find out whether we can connect it easily to our ldap
** answer is "proba... - 12:11 PM Task #7086 (Rejected): [dynamicweb]Expose password reset option in the user dashboard
- Make it visible under /settings.
- 08:04 AM Task #7084 (Closed): Survey Django App Installation v2
Distro: Alpine
08/22/2019
- 08:29 PM Task #6988 (Closed): Fix cdist configuration run on monitoring.place6
- 12:13 PM Task #6983: Setup networking for bluecmd/mainframe
- Well done
redmine@ungleich.ch writes: - 12:02 PM Task #6983 (Closed): Setup networking for bluecmd/mainframe
- 12:12 PM Task #7025 (Closed): Fix ifup bond0.22 ip: ioctl 0x8922 failed: Result not representable
Let's debug it when it comes again
redmine@ungleich.ch writes:- 12:04 PM Task #7025 (Feedback): Fix ifup bond0.22 ip: ioctl 0x8922 failed: Result not representable
- I cannot reproduce the issue.
- 12:08 PM Task #6946 (Closed): Setup the other side of the arista switches
- ! Command: show running-config
! device: switch1-place9 (DCS-7050S-52, EOS-4.18.6M-2GB)
!
! boot system flash:/EOS...
08/16/2019
- 10:46 AM Task #7053 (Rejected): Make nodejs/npm work on IPv6 only hosts
- h2. Description
The following error occurs when trying to install a package:...
08/15/2019
- 11:28 AM Task #7026: place9 hacking for getting ceph + netboot running
- Please document it and transfer the knowledge of how to create the usb
sticks to Sami (i.e. document first, have Sami... - 10:49 AM Task #7026: place9 hacking for getting ceph + netboot running
- update:
dhcpv6 netbooting with ipxe usb sticks is the current approach
08/13/2019
- 10:47 AM Task #7044 (Rejected): Document IPv6 only NAT64 enabled client network issues
- * Mobile phone connecting back to tmobile -> not possible in the wifi network
** likely hardcoded ipv4 address
08/12/2019
- 04:29 PM Task #7026: place9 hacking for getting ceph + netboot running
- !kernelpanicVFS.png!
ill try to unpack an alpine iso to see how does it boot to ramfs
08/10/2019
- 12:51 PM Task #6983: Setup networking for bluecmd/mainframe
- ** Opennebula:
vlan in "add networks" is under "802.1Q"
created vlans and attached to vm #24555:
bluecmd-... - 12:00 PM Task #6983: Setup networking for bluecmd/mainframe
- * switch 3-6
!
vlan 25
name bluecmd-public
!
vlan 26
name bluecmd-mgmt
!
vlan 27
name bluecmd-storage - 11:55 AM Task #6983: Setup networking for bluecmd/mainframe
- switches in place6
* switch 1 and 2
!
vlan 25
name bluecmd-public
!
vlan 26
name bluecmd-mgmt
!
... - 11:48 AM Task #6983 (In Progress): Setup networking for bluecmd/mainframe
- To be done
Tasks done:
* Create interface bond0.25 on routers
** -Update cdist config-
** -Apply to routers u...
08/08/2019
- 01:18 PM Task #7026: place9 hacking for getting ceph + netboot running
- fstab can be empty
rc.local can be empty
redmine@ungleich.ch writes: - 01:09 PM Task #7026: place9 hacking for getting ceph + netboot running
- I dont know how I instruct the system to load everyting to ramfs, because I havent seen extra parameters for it in ou...
- 01:11 PM Task #7025 (Seen): Fix ifup bond0.22 ip: ioctl 0x8922 failed: Result not representable
- 01:11 PM Task #7027 (Seen): Add new command to cdist / extend cdist to easily generate preos with ssh pubkey
08/07/2019
- 06:20 PM Task #7033 (Rejected): [dynamicweb] Payment fails without a proper message
- Steps to reproduce:
1. Choose a VM to buy at staging/dev servers for https://datacenterlight.ch
2. Register as a us... - 06:19 PM Task #7032 (Closed): [dynamicweb] If a user inputs an existing key in the VM buy flow, he/she is alerted that the key exists and the user can't proceed
- Steps to reproduce:
1. Choose a VM to buy at staging/dev servers for https://datacenterlight.ch
2. Register as a ...
08/05/2019
- 04:50 PM Task #7026: place9 hacking for getting ceph + netboot running
- using this
https://blog.skunkw0rks.io/blog/2018/09/03/pxe-boot-alpine-linux-pt.-1/
could be useful: https://blog...
08/02/2019
- 07:34 PM Task #7026: place9 hacking for getting ceph + netboot running
- dnsmasq:
switch2 port 19
switchport access vlan 22
ip addr add 192.168.0.1/24 dev bond0.22
- 02:00 PM Task #7026: place9 hacking for getting ceph + netboot running
- getting lldp to find out where we are:...
- 01:59 PM Task #7026: place9 hacking for getting ceph + netboot running
- Configuring port of mikrotik switch:...
- 01:56 PM Task #7026 (Closed): place9 hacking for getting ceph + netboot running
- * configure switches to put copper ports into internal vlan 22
* Setup 2nd router
* Configure vlan tagging
* Insta... - 02:50 PM Task #7027 (Rejected): Add new command to cdist / extend cdist to easily generate preos with ssh pubkey
- The main usage for preos is getting something that can be (net)booted, gets an IPv(6,4) address and is accessible by ...
- 01:53 PM Task #7025: Fix ifup bond0.22 ip: ioctl 0x8922 failed: Result not representable
- config:...
- 01:53 PM Task #7025 (Closed): Fix ifup bond0.22 ip: ioctl 0x8922 failed: Result not representable
07/30/2019
- 08:02 PM Task #7009: Find out why Alpine Linux hangs at boot when it does not have a link on a device with dhcp
- Work around:...
- 07:58 PM Task #7009: Find out why Alpine Linux hangs at boot when it does not have a link on a device with dhcp
- Trying as suggested in #alpine-linux:...
- 07:55 PM Task #7009: Find out why Alpine Linux hangs at boot when it does not have a link on a device with dhcp
- This config hangs again:...
- 07:51 PM Task #7009: Find out why Alpine Linux hangs at boot when it does not have a link on a device with dhcp
- This config does NOT hang at boot:...
- 07:49 PM Task #7009: Find out why Alpine Linux hangs at boot when it does not have a link on a device with dhcp
- Messages of boot:...
- 07:32 PM Task #7009 (In Progress): Find out why Alpine Linux hangs at boot when it does not have a link on a device with dhcp
- 07:26 PM Task #7009 (Rejected): Find out why Alpine Linux hangs at boot when it does not have a link on a device with dhcp
- ...
- 07:48 PM Task #7010 (Closed): Fix Alpine Linux installer to support serial && push it upstream
- yeah!
07/28/2019
- 09:14 PM Task #6541: Monitor fans and power supplies
- * Dominique, please approach @kjg in chat/infrastructure and implement it together with him
* @kjg: please read the ... - 02:37 PM Task #6541: Monitor fans and power supplies
- For both services you'll have to open up ports
Open them only from the inside (so only monitoring.place{5,6} is allo...
Also available in: Atom