Project

General

Profile

Activity

From 08/02/2019 to 08/31/2019

08/31/2019

07:53 PM Task #6998 (Feedback): Install & Setup netbox on an IPv6 only VM and find out how to get / reserve the next free ip address
For credentials, see channel org-ahmedbilal
I created a prefix 2a0a:e5c1:144:1::/64 using netbox web interface. It...
Ahmed Bilal

08/30/2019

12:14 PM Task #6998: Install & Setup netbox on an IPv6 only VM and find out how to get / reserve the next free ip address
Nico Schottelius wrote:
> ping. please create a proof of concept for getting the next free ip address of a network v...
Ahmed Bilal
12:10 PM Task #6998 (Seen): Install & Setup netbox on an IPv6 only VM and find out how to get / reserve the next free ip address
ping. please create a proof of concept for getting the next free ip address of a network via the API. Test it for IPv... Nico Schottelius
12:09 PM Task #6877 (In Progress): Start the first VMs on place9 cluster using ucloud (ucloud v1)
checking this out now Nico Schottelius
11:49 AM Task #7026: place9 hacking for getting ceph + netboot running
Note: we can/should remove the if clause, the first block is not needed Nico Schottelius
11:04 AM Task #7026: place9 hacking for getting ceph + netboot running
ipxe related:
I'd even enable
* #define DOWNLOAD_PROTO_HTTPS
* #define REBOOT_CMD
* #define POWEROFF_CMD
* #d...
Nico Schottelius

08/28/2019

07:16 PM Task #7032 (Closed): [dynamicweb] If a user inputs an existing key in the VM buy flow, he/she is alerted that the key exists and the user can't proceed
This was merged in 2.6.3 and deployed to production today. Mondi Ravi
06:38 PM Task #7097 (Rejected): Recompile alpine-extended iso for usb booting
to add support for:
zfs, console boot
maybe ungleich specific stuff: staff ssh keys, else?
ll nu

08/27/2019

08:23 PM Task #7026: place9 hacking for getting ceph + netboot running
///unfinished
git clone git://git.ipxe.org/ipxe.git
cd ipxe/src/
vi config/general.h
should look like this:
#d...
ll nu
04:02 PM Task #7032: [dynamicweb] If a user inputs an existing key in the VM buy flow, he/she is alerted that the key exists and the user can't proceed
Sanghee and I faced a wierd issue yesterday, while trying out the test steps via hosting flow.
The second attempt ...
Mondi Ravi
12:00 PM Task #7010: Fix Alpine Linux installer to support serial && push it upstream
Can you add the upstream merge request url in here? Nico Schottelius
11:40 AM Task #7010 (Waiting): Fix Alpine Linux installer to support serial && push it upstream
ll nu

08/26/2019

02:28 PM Task #7088 (Closed): [dynamicweb] Dashboard does not include a link to reset the password
Duplicate with #7086 Sanghee Kim
01:57 PM Task #7088 (Closed): [dynamicweb] Dashboard does not include a link to reset the password
Mondi Ravi
01:59 PM Task #7089 (New): [dynamicweb] Implement 2FA in dynamicweb with ungleich-otp
Here's Nico's idea to do it:
> I was wondering
>
> If we can write some javascript code
>
> that stores the ...
Mondi Ravi
01:57 PM Task #7087 (New): [dynamicweb] Remove password in email and replace it with a link to set it via dashboard
We send user's password after a user who's never registered with us, creates a VM.
Sharing passwords via email is ...
Mondi Ravi
01:18 PM Task #7032: [dynamicweb] If a user inputs an existing key in the VM buy flow, he/she is alerted that the key exists and the user can't proceed
I tested with the key I created and saved via generate key, and above flow works as expcted. Sanghee Kim
01:11 PM Task #7032: [dynamicweb] If a user inputs an existing key in the VM buy flow, he/she is alerted that the key exists and the user can't proceed
While testing, the step 1 goes to 404 error page after card submit, is this as expected? I think the error should be ... Sanghee Kim
12:48 PM Task #7032 (Feedback): [dynamicweb] If a user inputs an existing key in the VM buy flow, he/she is alerted that the key exists and the user can't proceed
I proposed a fix for this issue in the merge request https://code.ungleich.ch/ungleich-public/dynamicweb/merge_reques... Mondi Ravi
12:00 PM Task #7032 (In Progress): [dynamicweb] If a user inputs an existing key in the VM buy flow, he/she is alerted that the key exists and the user can't proceed
Mondi Ravi
12:57 PM Task #6978: control server ran out of inodes
mravi 05:05
we seem to have been running out of free inodes on control.ungleich.ch -- I've removed the cdist's cac...
ll nu
12:56 PM Task #6978 (Closed): control server ran out of inodes
ll nu
12:27 PM Task #7083: Survey Django App Installation and Test
Nico Schottelius wrote:
> Corrected the project -> use Open Infrastructure whenever we don't have internal details t...
Ahmed Bilal
08:39 AM Task #7083: Survey Django App Installation and Test
Corrected the project -> use Open Infrastructure whenever we don't have internal details that cannot be publicly shared Nico Schottelius
08:12 AM Task #7083: Survey Django App Installation and Test
Setup https://djangopackages.org/packages/p/django-survey-and-report/ as follows:
* Create a new ipv6 only VM
* Con...
Ahmed Bilal
08:04 AM Task #7083 (Closed): Survey Django App Installation and Test
Distro: Debian or Devuan
h2. Tests
* Find out whether we can connect it easily to our ldap
** answer is "proba...
Ahmed Bilal
12:11 PM Task #7086 (New): [dynamicweb]Expose password reset option in the user dashboard
Make it visible under /settings. Sanghee Kim
08:04 AM Task #7084 (Closed): Survey Django App Installation v2

Distro: Alpine
Ahmed Bilal

08/22/2019

08:29 PM Task #6988 (Closed): Fix cdist configuration run on monitoring.place6
Nico Schottelius
12:13 PM Task #6983: Setup networking for bluecmd/mainframe
Well done
redmine@ungleich.ch writes:
Nico Schottelius
12:02 PM Task #6983 (Closed): Setup networking for bluecmd/mainframe
ll nu
12:12 PM Task #7025 (Closed): Fix ifup bond0.22 ip: ioctl 0x8922 failed: Result not representable

Let's debug it when it comes again
redmine@ungleich.ch writes:
Nico Schottelius
12:04 PM Task #7025 (Feedback): Fix ifup bond0.22 ip: ioctl 0x8922 failed: Result not representable
I cannot reproduce the issue. ll nu
12:08 PM Task #6946 (Closed): Setup the other side of the arista switches
! Command: show running-config
! device: switch1-place9 (DCS-7050S-52, EOS-4.18.6M-2GB)
!
! boot system flash:/EOS...
ll nu

08/16/2019

10:46 AM Task #7053 (New): Make nodejs/npm work on IPv6 only hosts
h2. Description
The following error occurs when trying to install a package:...
Nico Schottelius

08/15/2019

11:28 AM Task #7026: place9 hacking for getting ceph + netboot running
Please document it and transfer the knowledge of how to create the usb
sticks to Sami (i.e. document first, have Sami...
Nico Schottelius
10:49 AM Task #7026: place9 hacking for getting ceph + netboot running
update:
dhcpv6 netbooting with ipxe usb sticks is the current approach
ll nu

08/13/2019

10:47 AM Task #7044 (New): Document IPv6 only NAT64 enabled client network issues
* Mobile phone connecting back to tmobile -> not possible in the wifi network
** likely hardcoded ipv4 address
Nico Schottelius

08/12/2019

04:29 PM Task #7026: place9 hacking for getting ceph + netboot running
!kernelpanicVFS.png!
ill try to unpack an alpine iso to see how does it boot to ramfs
ll nu

08/10/2019

12:51 PM Task #6983: Setup networking for bluecmd/mainframe
** Opennebula:
vlan in "add networks" is under "802.1Q"
created vlans and attached to vm #24555:
bluecmd-...
ll nu
12:00 PM Task #6983: Setup networking for bluecmd/mainframe
* switch 3-6
!
vlan 25
name bluecmd-public
!
vlan 26
name bluecmd-mgmt
!
vlan 27
name bluecmd-storage
ll nu
11:55 AM Task #6983: Setup networking for bluecmd/mainframe
switches in place6
* switch 1 and 2
!
vlan 25
name bluecmd-public
!
vlan 26
name bluecmd-mgmt
!
...
ll nu
11:48 AM Task #6983 (In Progress): Setup networking for bluecmd/mainframe
To be done
Tasks done:
* Create interface bond0.25 on routers
** -Update cdist config-
** -Apply to routers u...
Nico Schottelius

08/08/2019

01:18 PM Task #7026: place9 hacking for getting ceph + netboot running
fstab can be empty
rc.local can be empty
redmine@ungleich.ch writes:
Nico Schottelius
01:09 PM Task #7026: place9 hacking for getting ceph + netboot running
I dont know how I instruct the system to load everyting to ramfs, because I havent seen extra parameters for it in ou... ll nu
01:11 PM Task #7025 (Seen): Fix ifup bond0.22 ip: ioctl 0x8922 failed: Result not representable
ll nu
01:11 PM Task #7027 (Seen): Add new command to cdist / extend cdist to easily generate preos with ssh pubkey
ll nu

08/07/2019

06:20 PM Task #7033 (New): [dynamicweb] Payment fails without a proper message
Steps to reproduce:
1. Choose a VM to buy at staging/dev servers for https://datacenterlight.ch
2. Register as a us...
Mondi Ravi
06:19 PM Task #7032 (Closed): [dynamicweb] If a user inputs an existing key in the VM buy flow, he/she is alerted that the key exists and the user can't proceed
Steps to reproduce:
1. Choose a VM to buy at staging/dev servers for https://datacenterlight.ch
2. Register as a ...
Mondi Ravi

08/05/2019

04:50 PM Task #7026: place9 hacking for getting ceph + netboot running
using this
https://blog.skunkw0rks.io/blog/2018/09/03/pxe-boot-alpine-linux-pt.-1/
could be useful: https://blog...
ll nu

08/02/2019

07:34 PM Task #7026: place9 hacking for getting ceph + netboot running
dnsmasq:
switch2 port 19
switchport access vlan 22
ip addr add 192.168.0.1/24 dev bond0.22
ll nu
02:00 PM Task #7026: place9 hacking for getting ceph + netboot running
getting lldp to find out where we are:... Nico Schottelius
01:59 PM Task #7026: place9 hacking for getting ceph + netboot running
Configuring port of mikrotik switch:... Nico Schottelius
01:56 PM Task #7026 (Closed): place9 hacking for getting ceph + netboot running
* configure switches to put copper ports into internal vlan 22
* Setup 2nd router
* Configure vlan tagging
* Insta...
Nico Schottelius
02:50 PM Task #7027 (Rejected): Add new command to cdist / extend cdist to easily generate preos with ssh pubkey
The main usage for preos is getting something that can be (net)booted, gets an IPv(6,4) address and is accessible by ... Nico Schottelius
01:53 PM Task #7025: Fix ifup bond0.22 ip: ioctl 0x8922 failed: Result not representable
config:... Nico Schottelius
01:53 PM Task #7025 (Closed): Fix ifup bond0.22 ip: ioctl 0x8922 failed: Result not representable
Nico Schottelius
 

Also available in: Atom